If you want to get serious about casting buy one of the Lyman reloading manuals they have a section on casting and cast loads
the easiest way to lube and size the bullets is with the Lee lube and...
Type: Posts; User: shooternz
If you want to get serious about casting buy one of the Lyman reloading manuals they have a section on casting and cast loads
the easiest way to lube and size the bullets is with the Lee lube and...
It's the recommendation from Winchester low loads can cause the dreaded SecondaryExplosiveEffect so they say I would not push my luck under loading 296
there are plenty of other powders for lower...
Yeah that ball powder measures like water, don't down load 296 it's recommend for max loads only, for lighter loads use 231.
You guy's are lucky, I have had Lee die sets in 6.5x55 and 9mm both were total rubbish, They may have upped their quality lately but I prefer not to take the chance,
I have 3 of their push through...
The problem I have with Lee pistol dies is the expander it is not a proper expander it only flares the mouth of the case, with lead bullets it scrapes lead
off the bullet, The lyman dies are...
There are some.357/.38 dies on TM stay away from Lee, I think there is a Lyman 4 die set I can highly recommend them very well made,
If you are going with AP70 any small primer is ok magnum primers with ball powders if you want more velocity AR2205 is the one to use
158 grain cast or jacketed will be fine for most uses, I use a...