Just had a good week down south last week with the farther in-law, also putting the brothers ankle to the test after breaking it 8months back. 245765 also the in-law managed a bull tahr 245766
Type: Posts; User: dale
Just had a good week down south last week with the farther in-law, also putting the brothers ankle to the test after breaking it 8months back. 245765 also the in-law managed a bull tahr 245766
Yeh I have 3.5-28x50 on a 300 prc. Definitely better glass than z5 and z6 and x5. The only down side would be at low light at full zoom it can’t quite pull in as much light as you would like, totally...
Also what I did that made me help identify my problem was, measuring the new next, then a fired neck. Then full length size but without the expander ball and then re size again with the expander ball...
Yeh iv been down this rabbit hole. I did returned my brass back to the supplier and they said it was a bad batch, however I’m not convinced. I have done annealing on the same brass with no change to...
Back yesterday from a week up the rakaia. No chamois harmed but what are we thinking for size?
1st picture unicorn. My guess was a good 10.5 or so.
2nd buck about 8-8.5 small bases.
3rd buck...
Sorry second rifle is 7mm rem mag :thumbsup:
Two new to me rifles, both came to my attention via cam from alpine. Thanks for keeping my bank account empty
First rifle is a 300prc (replaced my old 7mmSAUM)
Defiance AnTi action
25inch...
218652
Just come back from a week down south with no real plan, first off had a go at a few wallaby’s with my brother up mt studholmes in the rain, it’s very entertaining plinking them off if you havnt done...
A mate that’s been doing it for years and was $500.
Have it back now and still goes over 13. So all is well and looks good on the wall. 210292210294
I’ve got both a 308 and 708. Shot more tahr with the 708 but they are both the same and what ever fits you will work well.
Don’t be like that :ORLY: I also managed to pick up 100 adg brass to chase me further down this rabbit hole. And have been looking at a amp annealer. Fuck my life !
15 times. Do you anneal every time?
Thanks for the info. Might look at new die.
So I have run one through the die without the expander and it comes to 0.308
That would be ideal. But they don’t have any brass in stock
I’m using Redding comp dies. And full length. I’ll have a play tomorrow and see how much it’s working the brass with/without the expander
Tried and couldn’t get that speed without pressure signs and tight bolt lift, the rifle also seemed to really like r26 and my goal was 162 at or just over 3000fps. If only I can get the brass to hold...
Hey guys, anyone care to shear their opinion on necks starting to split on two times fired brass.
Rifle was cut to standard Sami spec 7mmSAUM
Loaded neck is .315 fired case is .320
...
Got a update from my mate mounting my tahr. Goes about 13.3 and can’t wait to get it home. Just a bit of a Teese. 204352
Some local sea-dogs we have in Wellington 203821203822
Not sure this year but would like to know how you get on.?
This is just off a iPhone
Extra cool picture. 197692