I use Inox M3 which seems to work well and for long term storage MX4
never had rust to date.
https://www.inoxnz.co.nz/mx3-lubricant-2/
https://www.inoxnz.co.nz/mx4-lanox-lanolin-lubricant/
Type: Posts; User: DAF
I use Inox M3 which seems to work well and for long term storage MX4
never had rust to date.
https://www.inoxnz.co.nz/mx3-lubricant-2/
https://www.inoxnz.co.nz/mx4-lanox-lanolin-lubricant/
Thanks dannyb for the ping, I will take a look at this tonight @CamD
gmx addresses are a challenge and "@xtra.conz" email addresses have known issues we are still working through.
I will ...
212476
I made some changes and the pic upload just worked for me, can someone else test please?
thanks I will have a look at that and the notifications issue
Hey muzza,
Understand your thoughts but mate we had a serious technical issue causing outages so this was unplanned but very necessary
and we are back
please call out any issues
Hi Team,
Server is going down in 30 minutes for a major upgrade and will be down for several hours
thanks
Ive had the jet boil for years, never had an issue :thumbsup:
All back up and running now crisis averted:thumbsup:
76429
Its working now
Could you try posting the picture again
I've adjusted the server settings can you please try again?
Hiya, can you post what message your getting?
also what was the size of the pic?
I may need to make some changes to accomodate
With suppressing a super short 7mm Rem Mag you need to be wary of the pressure at the muzzle and the effect that will have on the suppressor.
last thing you want to do is wreck your suppressor
Agree, there are many much cheaper but just as good options. Nothing wrong with vortex, I have several and rate them
had ghost rings, love the red dot as it not too critical where your head is in relation to the sights
I use a Trijicon RMR Red Dot Sight on my 45/70 lever gun, it's fast acquiring and works well, if the red dot is on it out to 100 Yards, its getting hit by the 400gn freight train :thumbsup:
I'm in, looking forward to it
Yup Rem Mag has a lot of powder and because of this the pressure at the muzzle is very high especially with a short barrel I can run the numbers
Mines 26 inches and I've had at least 500 rounds...
I got a load developed for my new barrel and I'm pretty happy with the performance
The barrel took about 30 rounds to run in and cleaning has been easy since
The targets below red dot centre is...
Dan Hardy is another, I've been real happy with this work
If you make it a 7/300 WSM then no issue with this and there is plenty of brass about plus you get a longer neck then the 7wsm
Not quite true
I've got one of these, can't fault it, goes well
Yip i use 2206h in my 223 with the hornady 55gn sp projectiles goes mint