I tweaked the die length this morning to make the neck slightly longer
This 9.5x62R case is remarkably similar to the 303 Brit
Will feed and extract like a dream
228259
Type: Posts; User: akaroa1
I tweaked the die length this morning to make the neck slightly longer
This 9.5x62R case is remarkably similar to the 303 Brit
Will feed and extract like a dream
228259
9.5x62R case capacity is 70 grains W760
to base of the neck
So same capacity as the 9.3x74R in a shorter fatter case but starting with a 45-90 case which is readily available
My 375 Wildcat idea is taking shape
45-90 brass annealed and run into a 375 H&H sizing die shortened 11mm
The 45-90 brass grew 1mm longer in the forming
So I have named it 9.5x62R because i...
Work in progress on buying the 303-22
The 303 case family is generally bigger than what's currently considered safe in a contender but it would bolt in on an encore
If the twist was right it...
Here's a nice 375 wildcat
375 Renner
Cut a short chamber with standard 375 H&H chamber reamer
Make brass from 45-90 which is actually reasonably available
Shorten standard 375 H&H sizer die...
That would be nice if 307 brass grew on trees
I have about 120x 307 cases and those from 3 different sources. I would gladly snap up any 307 brass and wildcat it
6mm-307 would just use 243...
Never had separation problems
30-30 just lacks boiler room
I just wanted a little more horsepower
blip I do like the 30-30 case and have two single shot 30-30s and four other 30-30 family single shots.
But it is pretty limited in case capacity and that is where the 303 and 30-40 case really come...
I sure do understand
I could make a rimless extractor for the 307 I have just build and run it with standard 308 brass
But I like single shot rifle and have stayed true to the rimmed cases
...
The great benefit of the 6.5 is accuracy.
I'm guessing a 303-6.5 in a bolt action LE is not really a great platform to get the best out of that wildcat
The 303-25 was very popular in Australia...
I'm also chasing buying a 303-22 complete rifle that comes with brass, dies and the chamber reamer that it was cut with
That's an interesting wildcat
I also have 303-25 dies and could make a...
My wildcat leaning is towards a 375 because of reasonable bullet options
But it needs to be rimmed
So I was thinking a 9.3x74R case necked up to 375
A nice sized good quality case but not as...