Hey Micky Duck
Thanks for the input.
I have loaded from min to max load for 5 different projectiles for this rifle. I have cross referenced the ADI reloading manual with the projectile...
Type: Posts; User: Strider B
Hey Micky Duck
Thanks for the input.
I have loaded from min to max load for 5 different projectiles for this rifle. I have cross referenced the ADI reloading manual with the projectile...
Glorious, cheers mimms2
How short is stupid short? It was cut down to 15" and suppressed with a graystone 3k by the previous owner.
133324
3 flat primers and one unfired for reference.
44.0 gr of 2206h under 150gr nosler BT
I have a neck sizing die for .308 so I might try a few loads with that, I found that last time I use it some of the rounds were a bit hard to chamber.
Using federal premium brass, federal primers. Unsure of jump. There’s heaps of jump, have used my oal gauge and the projectile I’m using is barely seated when at the lands but mag length dictates oal...
Hey Team
I’ve been developing a load for my kimber .308 and have noticed that my primers are flattening out quite badly.
Im loading .5gr under max load and am seating at 2.80“ so it shouldn’t...