Yes Grant has a 6mmARC reamer, I got a 1x10 twist as didn't want to shoot the heavier bullets. The 75gn vmax are very accurate and most effective with CFE 223.
To me its only a 400mtr cartridge on...
Type: Posts; User: 300MAG
Yes Grant has a 6mmARC reamer, I got a 1x10 twist as didn't want to shoot the heavier bullets. The 75gn vmax are very accurate and most effective with CFE 223.
To me its only a 400mtr cartridge on...
New 6mm barrel from Truefile (have a cheap 7.62x39 if you want a new one) wanted their deep valute fluting to help cooling as this rifle fires lots of rounds (45 goats last weekend). The 87gn bullets...
1x10
A Howa Mini in 6mmARC 20" Barrel lightweight stock 87gn 2900fps 75gn 3015fps
172999
Well Jeff as I told you in our conversation I will not be blackmailed in replacing a carbonfibre stock that you some how broke after two years (most probably falling on the stock putting a large...
I believe you have it wrong, Rem model 7 only fits our Rem Hunter stock with rem v-block - nothing to do with the Sako 85 stock.
I've had a 16" barreled 6.5x284 for 6 years now its my go to rifle, have shot 4 nice 8 point Sika with it. 143gn ELDs at 2750fps 130gn ABs at 2800fps consistently groups 1/2, far more efficient than...
I see hodgdon have it on their load data website, I did my development back in 2012.
Lilgun for me was better than H110 - 110gn vmaxs at 2500fpc max and 125gn 2450fps max I settled just below...
Hi Wingman have you tried lil'gun in your supersonic loads, I've had good results with both 110gn vmaxs and nosler 125gn
Thinking of trying the 135gn fmx heard they work well
Does anyone know if there is a 22/6.5x47 reamer available in NZ, thanks.
Thanks guys been a great help
so you recommend a airgun trigger for when using a suppressor, so it wouldn't work without.
Many using the new Labradar - how are they finding it - any troubles to be concerned about.
Just seen one at Serious Shooters in jafaland for under $995 early in the week thinking about moving up...
Thinking about putting a 30cal switch barrel with the 338cal barrel(TRG), 208gn A-Max at 3150fps I feel are even better than a 285gn at 2700fps, a truly devistating bullet(208).
Gillie you'll never regret a TRG
This is my favourite .338 wildcat. A 30-338 improved longer neck - 35deg shoulder- slightly less taper, built it to shoot the 200gn A-Max 3150fps easily. Have had it now for 4 years and still on...
Only have a 26'' barrel - 2775fps
Sent last week chasing Sika stags with my 6.5x284 and the 143gn ELD-Xs. Managed two good sized animals and recovered 1 x bullet, the bullet in the photo ended up weighting 90gns lost 53gns when...
For the disbelievers and conspiractists this is a hole new bullet .055 longer that old A-Max, loaded in a 6.5GAP and 6.5x284 loaded to suit T3 magnum mag.
46682
Had to change the seating depth from old a-max, further out by .05, shot in the same point of aim.
Five round group old a-max chronographed at 3022fps SD 16 / ELD-X 5 round 3077fps SD 14 both...
These are different a-maxs says so on the box and the tip is a different colour - too scary to look at the cc slip
Look what the courier dropped off this morning, just in time for those sika stags
46633
I have one in .223 pretty impressed cools down really fast
Thanks for that Chris, keen on a lightweight can to fit both a TRG 338 (18x1.5 thread)and a custom Lapua 300MAG.
Where would be the better place to get a AI muzzle brake
Chris does this suppressor require the AI muzzle brake as mentioned in a earlier thread, if so what barrel thread is required and how available are the AI brakes. Cheers
My TRG IS the most accurate off the shelf rifle I have ever brought but with the factory bipod, didn't shoot half as well off Harris or atlas. 285gn A-Maxs at 2750fps are deadly and fill within mag,...