248109
Never tried to shoot a 10 shot group before. Loads are 63.5 rl26 average 2869fps. ES of 60.3 SD of 16.6.
Reckon I will back this off by .5 or 1.0 gn to see if i can reduce the ES and tighten...
Type: Posts; User: AMac
248109
Never tried to shoot a 10 shot group before. Loads are 63.5 rl26 average 2869fps. ES of 60.3 SD of 16.6.
Reckon I will back this off by .5 or 1.0 gn to see if i can reduce the ES and tighten...
Well after the last trip to the range in December and results that were disappointing to say the least, I did a bit of research and spied a Bryan Litz article that discussed the Effects of eating...
20” barrel fed 215 primers
Nope scales are fine.
Hi Chainsaw, no pressure signs - checking the scales is a good idea I have not done that for years. I am on grandad duty tonight (babysitting) so will have a look tomorrow.
Cheers
AMac
Ok ran a ladder test with the RL26 and the results were a tad confounding!
180ELDM in norma 300 Saum cases necked to 7mm 1x fired and FLRS fed 215 primers.
Using a magnetospeed crono
gn fps...
Interesting thanks guys - something else to buy ! Or should I say keep an eye out for
Could you explain the game changing effect of the 210s over the 215s please?
Rounds to test loaded and registered for the local NZDA rage for next sunday so will see how it all goes.
Cheers
AMac
Thanks chainsaw will start lower and see how i go.
Mag fit at the coal which is handy - gave them a dummy round with a 175edlx seated out that still fitted in the mag.
Hi Kelton
Got 2 lb - and yikes my wife just spotted the card payment!!!
Only have 215 feds not seen 210 about for a while.
T3 20” trueflite had them chamber with a long throat COAL 3.100”....
Morning all
Just got my mitts on the magic powder I have been reading about for a couple of years!
Got it from reloaders supplies fyi.
Would appreciate advice on loads for both 162 and 180...