Search:

Or a 56

Might be a 53 definitely not a No2.

Patch out accelerator dissolves carbon very effectively. I’d fill the can with some in a zip lock and put it in the ultrasonic. That’s how I’ve been cleaning my take apart suppressors. They come out...

I always exclude in Gordon’s or quickload as my thought is as soon as the projectile leaves the muzzle the expanding gases pushing it instead start to expand in the suppressor.

Hi, yes you use the original recoil lug. It will pull out of the factory stock with pliers. Yes you should bed it.

I use both, have used qload the most as it’s most familiar to me. GRT has been really handy as it has powders that aren’t in qload. You still need to validate theoretical loads with actual results of...

I’ve got a wsm and wm, only fired a mates rm. I’d go with the wsm personally and suppressed over braked although I think it’s the ATec you can put a brake on the end of the suppressor. Wsm recoil is...

Varuste which folk have already said, had a few orders with them always very quick to arrive.
I got a pair of new Meindl desert issue boots for about $150 delivered from eBay, can’t fault the value...

You could borrow my dog, had a 13 3/4 Tahr head blown off the wood pile while it was drying. She had no trouble removing the horns in no time at all and chewing them up. Might not be what you’re...

Had three bolt actions never had a failure to fire from any of them. Mix of the ammo that’s available here too.

I’ve had about half a dozen rifles threaded by dpt, always a first class job.

Reloaders had some a few weeks back.

You should be able to get measurements online too

I’ve got a 500

Not sure if it’ll suit you but you can get spray cans of it. CRC do it and some others too.

What brass is it? Have you loaded these cases before?

If the decapping pin isn’t pushed fully in you can lock them in place screwing on the expander so it is possible to deprime and have the expander too high up in the die still. Might be more likely in...

Expander too far up in the body of the die so it’s trying to expand while the neck is still within the neck part of the die perhaps. If it’s that, make sure decamping pin is pushed in fully and lower...

https://www.outdoorlife.com/story/guns/rimfire-showdown-best-rimfires-of-all-time/

Ballistics comparison between the rim fires.

I’ve got a couple 17wsm from your list. I like the calibre if you accept the limitations which apart from using it on suitable targets only is the effect of wind on the projectile which is...

Chinese ones are unreliable, I thought trademe had banned their sale on the site. Pretty confident the brand I mentioned would work for you, stopped mine going next door to murder chickens and the...

Used one for about ten years for my two. Very effective. Avoid the cheapo Chinese ones, Petsafe is a good brand. I use the radio beacon system they do, no buried wires and perimeter set by adjusting...

2930 with the scirocco II, 26” barrel using superperformance. Got pressure earlier with rl26.

Forgot to mention mate uses the 130 gamechanger in his, good results too.

Use the 130 scirocco II as my hunting round, pretty spendy now but excellent results, took most of my stuff in Africa with it. 130 Berger also works very well.