Search:

No experience in wapiti river sorry, but before you head in, call all the previous parties and see if they come forward with any info on where they hunted and their findings - we found this...

Cheers, I may go in another direction here, keen on some Sierra match kings 183gr #1983

I have 2.5 boxes of 162gr eldm I’m wanting to swap for 180gr ELDM

Hi,

I have x32 143gr eld-x to swap for some 7mm projectiles in the form of:

168gr Berger
168gr NABLR
160gr TMK
162gr ELD-X or M

I had this with an a7 7RM, hit vx6hd windage and fell back into action every time, sako bolt heads are a design flaw, I have this documented on my invoice by Robbie tiffen from Gunworks to… my 85 708...

As above, very affordable for what they are, will have them for life:
https://industrialtooling.co.nz/collections/digital-calipers/products/mitutoyo-caliper-digital-150-6-no-data-output
Sorry, to...

Mate, just buy digital mitutoyo 150mm (easier handling) no guess work reads to the thousandth (0.000”)
Closest thing to a micrometer, not to mention its accuracy and repeatability, best bit of kit...

ELD-M - SPF

Keen on some 7 saum or 7mm rem mag components, mainly 7saum components preferably.
Can sell the below also:

1) Hornady 208 ELD-M - x30
2) Hornady 212 ELD-C - x26

3) Nosler 7mm 120 BT - x11...

PM’d ya

sako 85 18" 708, 150gr eldx, lapua brass, 2775FPS, DPT, vx6hd 3-18 (this will change to a more compact scope, vx5 2-10 or vx6 2-12).
Ive had rem mags and thinking of getting another for down here in...

Yip same here, i use "Briwax" clear, furniture polish to, worked a treat on my model 7, going to do my sendero shortly and will use it.

I own a vx6hd 3-18x44 TMOA Illum, it’s on my sako 85 708 (only because it’s sitting around untill I build or buy a 7mm Blaser), which has got me thinking what will I replace it with. The swaro z5...

They work really well in my 708 at 2770fps, have shot a few deer out to 350yds and a cham at 260, bang flops, and pass throughs, good amount of damage nothing like a berger from a magnum from my...

My opinion from doing the research, 7 Saum 1-8” 24-26” and 180gr eldm or similar with ADG or similar brass to give 3k a nudge...

In my situation on the a7 I was using Talley lows with my 3-18 vx6hd, and optilock lows (one piece) on my 85 with same scope, it’s the size of the turret that doesn’t help the situation.

Thanks for the input there, interesting that beretta won’t front up tho, but as expected unfortunately...
Pretty sure gunworks mentioned it was the position of the claw itself, but I diddnt dive...

I had a 7mm RM sako a7 roughtech, with my vx6hd the brass would eject into the windage turret and fall back into the receiver every single time without fail, which in it self is a fail. Took it to...

Blitzkings gone. Be keen to swap or buy a couple of 195gr berger vld and 183gr SMK.

I have the below projectiles mainly for swap.

x8 7mm 162gr ELD-X
x11 7mm 120gr Nosler Ballistic Tips
x14 .224 50gr Sierra Blitzkings

Im after some 180gr eld match or similar for some testing.

Still have the abouve projectiles, also adding to the mix

7mm 120gr nosler ballistic tips x11 of.

Keen to swap for .22 projectiles and 7mm

I have just finished load development on my sako 85 708 18” with the 150gr eld-x in lapua brass using 2208.
I Found pretty much all 3 shot groups went around the half inch mark, final load went...

Im after some 7mm 150gr ELD-X for load development, i can swap the above plus cash pending on how many you have on offer.

Cheers

2206h for 65 SGK (25gr) and 75 eld-m (24gr) in a tikka t3x 8”.
I’m having trouble with 53gr varmageddon and VMAX grouping with the 2206h tho, I’m about to try 2208/varget next tho...

leupold vx6-hd 3-18x44 T-moa reticle illuminated