It gets worse as Litz measured them at 0.458. If the same profile was used for a 160gr they would on this basis be under 0.5 G1.
If the Classic Hunters because of the more forgiving ogive can...
Type: Posts; User: Puffin
It gets worse as Litz measured them at 0.458. If the same profile was used for a 160gr they would on this basis be under 0.5 G1.
If the Classic Hunters because of the more forgiving ogive can...
Puku, a quick check on the Berger website shows no 180gr Classic Hunter. The only hybrid in 7mm 180gr is in the target range and remains at VLD length.
Looking forward to early results coming in...
+1 on the NBT tuning, as expected first loads tried with BTs were the best I've shot with the .280 and presumably could be made smaller still.
Below is the Classic Hunter and 140NBT as no 150s...
.280 improved. Yes, it will be interesting to see what effect if any the longer bearing surface has. I don't have a lot of data for the VLD with the current barrel so am interested in hearing from...
Classic hunter next to the VLD, 7mm, 168gr. positioned with the start of the shank roughly level so the likely difference in in COAL for loaded rounds can be seen, about 3.5mm less. Litz is a...
Got a couple of boxes to try out as alternatives to the 7mm 168gr VLD.
Touching the lands and still fit in the magazine - so far so good.
Has anyone tried these Classic Hunter bullets out...