With my unit I set it up in front of, and just to the side of the suppressor when using suppressed rifles. No air gun trigger required.
Cheers
Type: Posts; User: Twosixty
With my unit I set it up in front of, and just to the side of the suppressor when using suppressed rifles. No air gun trigger required.
Cheers
My friends and I have jet boils, all have had the piezo ignitions fail so don’t count it as a pro vs an msr without it. I would probably go msr windburner or similar. You may not think you’ll do much...
With my barrel, my POI shifts by a good 10 inches at 100m. That’s with using both a DPT and a hardy stealth. My understanding of it is it alters the barrel ‘whip’ as its 300gm or so hanging right off...
Good stuff, similar to how my brother and I do our load development now. No point loadin 3 up at low charge weights when you won’t accept their low velocity anyway....
Did the rounds spend a longer time than normal sitting in your hot chamber?
Yes I have done that in the past on my old tikka t3. Raised the comb nicely to line your eye up with a 40mm objective scope. Would definitely do it again for that size but if your scope is larger it...
I’ve dealt with them they’re fantastic
I've had two, za5 and a zx5
Za5 had schott glass, nice to look through but very mushy turrets. Returned it and was given a zx5. Glass didn't seem anywhere as good, however turrets were better.
...
Zeiss conquest v6 3-18x50 with Moa reticle. Not quite sure if they've made it to nz yet.
Have you checked out k2 Antarctic products? Made in NZ too
As above, the fat wrench is great but wouldn't recommend their levelling kit. Does anyone use a digital angle gauge/finder for levelling their reticle? Could be an idea and will be what I try next...
Just got a new minaret myself since macpac are having their sale. $450. 2260gm all good to go after seam sealing, thats everything including the small spares kit. Without the inner would be around...
Swazi, best I've seen used. have given mine a hard time and ended up breaking the zip. They fixed them for free
Looking forward to the answer to this! Also is it as simple as buying the above brass and running it through your full length sizing die followed by measuring and trimming case if required?
Yeah mate that'll be the best way, but I want to swat up first so I know what I'm watching. Cheers for the replays so far
Hi guys, new to the forum, and about to be new to reloading.
I have purchased an RCBS rockchucker kit and a set of redding deluxe dies. I intend to load 143 eldx with lapua brass in my 260. I'm in...