I ran into this problem in my straight walled cases using trailboss
some shots would have a bit of leakage and be stingy on my eye
not a major but worth mentioning
Type: Posts; User: Bill999
I ran into this problem in my straight walled cases using trailboss
some shots would have a bit of leakage and be stingy on my eye
not a major but worth mentioning
yeah mate i can seat it out if need be the bullets are flat based with a gas check, the load is for a bolt action with plenty of space in the mag, with more available with a little modifuckation
...
iv had nothing but success with it im my 308, its a shame its not more suitable
I opened airtight seal the container to see how much fit in the BLK case so im committed now
Yeah I hear 2205 and lil gun are the business.
I'll give a moderate load a shot with trailboss and see what it yields
at least lead bullets will be easy to unstuck
I use my 308 dipper to fill my powder scales mostly just as a spoon
I weight measure each powder load, no matter what its going into
If I have to buy ill look into that or lil gun if I cant get away with using what I have
at the moment i have 2208 and 2209 on hand
as well as trail boss
I also live in bumfuck nowhere and getting...
I have managed to stick a jacketed bullet in my 450bush master with trailboss in the past but at least with that i can gently tap it out with an ali rod
good luck in a 30cal
For the 300 blackout, if you want 1050 fps:
6.3/950 = X/1050 solve for X
X= 6.9 gr of Trailboss for ~1050 fps
For my 308 subsonic for 175gr/178gr bullets: at ~1050 fps it is 10.8gr of...
I thought the go was as long as its not compressed its good to go with this bulky stuff?
I am concerned that if i start with less ill get a bullet stuck, even at 5.5gr im getting a bit...
I can comfortably fit about 5.5gr of trailboss into a 300blk case, under a 151gr cast lead projectile of roberts
Im guessing it will be around 800ish fps which would be fine with me
I have tons...