Search:

Work up to a little bit over 67gn of 2213 with 24 inches tikka barrel, 2830fts

What I will do with new batch of powder is load some rounds to do the ladder test and compare to the old recipes.
Same thing happened to my 300wsm with 2213. My solution is buy the same batch 4kg...

Swaro factory can replace scope tub, so they probably will replace the scratched lens rather than recoating it. Not cheap I guess. Contact JP at Wellington, he is a top man!

180 vld hunting 65 tho off land doing 2950ft/s

https://www.nzhuntingandshooting.co.nz/f10/tikka-t3-mag-modification-54445/
Tikka 300wsm magazine modification.
I load my 300 wsm with 208 eldm at 2.985 OAL and there’s plenty of room to seat the...

163479
You can’t go wrong with either of them, shoot with confidence! :thumbsup:

Have had a couple Swarovski x5, not the x5i and a couple of night force nxs. I would say the Swarovski x5 have the best dialing turret( solid 、 clear clicks）and glasses I have ever put my hands...

Above, leverage the real reason.
How I attach my rifle on my pack, 3 side straps and a stock holder at the bottom.

162274

Leupold mark5 hd, swaro x5, kahle 525i, NF nxs, nx8. Long range for sure!

6-48 1/4 Screws. https://workshopinnovation.co.nz/ Sells them for a few cents each! You are welcome!

Have tried one on mates 7mm rem mag, it’s game changer indeed! Once input the cartridge data, aim through the scope press the button and fire. Easy and fast, no rangefinder no ballistic app needed...

Well done! Happy shooting !

Good work! You probably can get a bit more velocity by using thicker Norma brass as that 284 chamber in .322 neck.
I have 76 162 eldx left, let me know if you want it.

Rock

I run 180 Vld hunting on my 20 inches Sako 85 7mm rem mag with IMR 8133 powder.
Work up to 74gn 8133 and 60 tho jump, 2900fts no pressure sign, three shots quarter to half inch at 100m.

The optilock are good, but no many choices for the Sako 85s. There’s no holes on the 85’s dove tail to screw down the rail, so the rail only grab it by two little clamps. The SwaroDS , rail and...

[QUOTE=MSL;1072540]I got a set of 30mm optiloks for $150, and mounted a premier 3-15x50 on my sako Bavarian. If a rail falls off a rifle, it has been installed by a muppet.

Nah mate , it’s a...

I am very disappointed with Sako 75 & 85 mounting options. One piece Sako optic lock $350( stainless), only suit the small objects scope.
For the bigger objects scope, Sako optilock two pieces...

22 inches barrel, 1:9.5 twist. I am doing the load development and getting 2900fts with IMR8133 powder but the groups is not good at 2 inches.

Even though you use those long mag you still limited by 3.4xx coal length without having the action metal work.
The coal of the 180 vld hunting is about 3.475 in my Sako 85 to touch the land.

Would you mine share your load data? Thanks

Hi mate, I have used a few 500g bottles of adi 2213sc powders and never have any problem. Yep, it could be the difference from lots to lots. I have worked up some rounds to test. My solution for...

It is common to have POI shift with suppressor, just sight in your rifle with the suppressor on and shoot with it.

Normally the bigger the longer suppressors have better sound reduction, but...

Man, if you shoot with a suppressor, you have to put you labradar forward and the muzzle of suppressor is 10cm behind on the side of your labradar.

If you shoot with a muzzle brake or nothing,...

Yep, because too much work for the police to give permit for those stuffs, so no permit for scope anymore.

The optic planet won’t ship most rifle scope to nz, you can have a try to find out.
...

I just came back from the range, both loads were loaded last night and shot this morning.