Search:

Spoke to Tracy at Deadeye, he suggested 7 LRM as a straight rechamber. $350 to rechamber, $200 for dies and $3 a pice for the brass. So for $1000 I could fit the atlasworx DBM and ASICS mags (to run...

Yeah, others have suggested 7BM too, and eventually that’s the plan, and absolutely ticks all the boxes

You’re quite right, the 162gr eldx is great and comfortably gets me to 1000 yards. I ran a ladder test last week, and although the chrono was on the blink it looked like my top accuracy node was only...

Stocky thanks mate yeah will do, have had a good look around and found that there has been two revisions of the CIP standard reamer, Rev B has a freebore measurement of .3645", whereas the original...

Bit of an update, Dave Ward does, but doesn’t have the 7BM reamer. And Arthur Clealand does, and has quoted me $350 to rechamber, including a bit extra to get the reamer... bargain if you ask me

Greg just got back to me, he’s been super busy. Unfortunately no, he does not re-chamber tikka barrels

:XD: maybe the next one...

No worries mate, I figured you had made a mistake.

Advice on here says that Kiwi Greg at terminator products does, I’ve pm’d him, just waiting for a reply

Hindsight is a wonderful thing. I bought the T3 early last year, knowing the 7RM and loving it. And then went and snapped my Achilles’ tendon... twice. And while recuperating after a couple surgeries...

Given what I want to do the 7BM is looking more and more likely, thanks for the side by side comparison

Thanks mate

Absolutely agree with you. But having the theoretical energy (1000 ft/lbs) to take an animal cleanly and taking that shot are two very different things.

Now I could say that the belted magnums don’t like being FL sized and end up with case separation due to work hardening... but I’d be full of s****. Honestly, i don’t like the belt purely because of...

Impressive data, thank you very much for that, and will definitely look into 7-300 NM too. I hadn’t planned on opening the bolt face, but that is definitely an easy option, especially seeing the info...

Haven’t found that thread, but even the thought makes my nuts shrivel a little bit...

I’ve been halfway through a .338 edge build for the past 6 years or so. I’ve used a Winchester P14 action, but to complete that build, I need to spend a bit on a decent barrel and stock... and grow...

Thanks for that info, working up a suitable 180gr load is where I’ll start, and just hand feed when shooting at distance. At the end of the day if I’m not capable of making those shots, then it would...

When I get into it I’ll fit the atlasworxs bottom metal using aics mags which will allow 3.6” COAL. That should allow a decent length projectile seating (although I don’t have any info as yet) and...

Still brand new, only had 10 rounds through. Just about to work up a load with 162gr eld-x’s and RL22, see how that goes for speed/accuracy. If it doesn’t like the elds, I’ll try nosler 168gr LR’s....

Not keen on selling up,

thanks for that mate I’ll look it up

Without a complete re barrel

I’ll be completely honest here... there is a lot of the “cool” factor coming in here, but what I want is to increase the range to point where I could possibly hit steel out to 1 mile. And if I’m up...

OK, so this is a total pipe dream at this stage, but I’m looking at re-chambering my Tikka 7RM. I’m looking at 7-375 Ruger, or possibly 7-300 PRC.
The thought behind it is, I want to keep it mag...