Cheers I had a look and that’s not the case here. The only high part of this mag box is the back and as per the photo there’s daylight between mag box and receiver. If could just be the poor bedding...
Type: Posts; User: Delphus
Cheers I had a look and that’s not the case here. The only high part of this mag box is the back and as per the photo there’s daylight between mag box and receiver. If could just be the poor bedding...
I used an old bastard rasp to shape it, then just sanded it smooth
Yep I imagine it would. The powlonia is already a fairly strong wood, just soft and easily dinged. Several coats of epoxy over the top should be plenty to give it extra strength. I suspect using...
What do you mean by mag box binding?? How is it fixed?
Took it to the range today to sight in. I’m pretty happy with the result. The groups have widened slightly more than with the previous stock, but that was 400gm heavier and I had done a full bedding...
Very happy with that weight! That’s with sling studs, bottom metal(plastic) and jandal recoil pad.
Now just need to reassemble and get to the range :)
199010
Ha yep sure is! Many mistakes were made. I’m sure that if I did it again I would do a much better job of it. I made the stock from powlonia :)
Yours looks great man!
All up this cost me about $140 in parts. Labour on the other hand……
Well I have finally done it. It’s not pretty in places, but that just gives it a bit of character.
I have it sanded down to a 1200 grit paper, and think I’ll leave it there. I could give it the...