I bought one from an outdoors shop in the main street of Hamilton in 1997. I think the shop is long gone but can take some pictures if you want. If I were doing it now I would just get one from...
Type: Posts; User: feratox
I bought one from an outdoors shop in the main street of Hamilton in 1997. I think the shop is long gone but can take some pictures if you want. If I were doing it now I would just get one from...
Have just gone to use my autotrickler after having it sit idle for several months and found that the main powder dispense tube won't turn freely. The stepper motor is fine, it's jut the tube. It's...
Might get a 6xc or 6x47 to go that fast and be short enough (case length) but long barrel life and fast projectiles/ hot loads don't usually go together
Leofotonz on trademe, which is gunsnz.com or aliexpress
https://www.armisticeincambridge.org.nz/
Back on again this weekend. Might be of interest to a few of you. Quite possibly the worst advertised event around, I live 5 minutes away and only realized it was on because a willy's jeep drove...
I have a 16 gun fire proof job. Wish I had gone bigger. Unless they are all small opensight rifles or single barrel shotguns you can't fit anywhere near that number of firearms in there, let alone...
Are the small objective lens scopes useful (by small I mean 24 or 28 mm). I understand a bigger lens is going to be better when light starts to disappear, but how much so. Looking at something 2-10 x...
Have some long Bosch bits that have lasted a while. Where space is not limited I've found the cheap Irwin bits ok. Came in a packet of 50. Is just the bit and needs a holder to be used. Are good...
Have you tried without suppressor or with different muzzle device
If you're careful, try lapping the bolt to the raceways so its as smooth as it can get. Also "smoothing" or putting a gentle radius on the lower rear of the bolt to help it ride over the hammer...
Possibly either torque on the stock (while trying to aim in an awkward position) twisting the action or causing the stock contact he barrel, or parallax issues fromm awkward positioning, I.e. not...
Osange orange if you can find it. Otherwise try find some old skis,use front half and shape them for limbs. Laminate some wood and something synthetic for a handle and bolt ski bits to it.
https://i.stuff.co.nz/national/300895933/couple-who-pointed-finger-pistols-at-court-staff-have-firearms-licences-revoked
Nice work
Should be drop for 260 but windage for 300
Was wondering the same thing. Might almost make the messenger part redundant. Still need the plb but both the mapping and messaging could be done from a phone
From experience here (with a different flavour of tractor, not all in same tractor); the 3rd one seems most likely
1. had a front diff partially go in one, would go in 4wd but would "slip" when...
I bought a flood damaged European about 10 years ago and rebuilt it. Took quite a bit ordering bits and visiting the wreckers to get it sorted. Hardest part was finding someone to certify the repair....
Hi all. I'm in Queenstown for a class reunion of sorts toward the end of April. I'm wondering if it's worthwhile taking a rifle and heading to the hills somewhere after. Do you fine people know what...
No real experience here, but from what I've heard from others, I probably wouldn't get one unless it was for a flat farm with very little mud. 2wd is cool for a bike, but is not rated for slopes...
He's more than welcome to come and shoot some pheasants here. Getting sick of the fucking things. Can't ride your bike round the farm without one flying out in front of you, and they do a lot of...
Went on Saturday. Have the same opinion. Glad it was free entry this year though. Most displays are people's hobbies though so can understand why not many were here with what it would cost them
I'm pretty sure Shooter Ready in Cambridge had one on the shelf last time I was there. They'll be at sika show if you're going.
F class is 223 and 308. 223 does ok at 1000. Pretty much the same drop as 308 depending on projectile, just more affected by the wind. I've been well outclassed by an 80-something year old with a 223...