Search:

Just FYI, the cerakote finish will be damaged from ultrasonic cleaner.

247940

Tumbling with media will damage the finishing on the outside, for which I'd try to avoid. -- Although the cerakote already started peeling off due to the ultrasonic cleaning.

Here are some feedback based the experiment I did last night.

Schletek Suppressor Cleaner -> Not really useful against heavy carbon deposit.
Simple green + 2 hours of ultrasonic cleaning -> It...

It was 3d printed Inconel 718, the nickle based alloy.

Bert from Oceania Defense suggests the simple green with ultrasonics. Tried and it only removes some. I will give it a try with different solutions.

Thanks! I will give it a try with my muzzle brake first.

Tried the simple green in the ultrasonics. Will make the carbon flakes to fall off but far from clean.

I'm planning to apply the Schletek Suppressor Cleaner first, then ultrasonic to clean the...

Just purchased the Schletek Suppressor Cleaner from reloading supplies. I'll post the review here if I can get the suppressor cleaned.

Hi all,
I need some recommendation on cleaning the fully sealed suppressor.

Here are some backgrounds
I've been using the Oceania Defense 7.62 QD suppressor for more than 3 years without...

Your elevation looks fine to me. If you're aiming the center of the plate, your dope seems correct.

I verify the BC with the following process
1. Measure the muzzle velocity
2. Use muzzle...

Got the chance to compare two units against the same gun at the same time. Most of shots are within 1fps difference between the two.

243978
243979

Eitherway the headspace should be determined by the go/nogo gauge instead of a vergin brass...

I bought mine from Area 419, $50 shipping with the same price.

Brought the Garmin to the range day on Saturday. The feedback was positive. Picked up every shots without misses. It also won't pickup your neighbours shot neither unless you're shooting too close to...

Made a ARCA mount for the tri-pod.

Link: https://github.com/eamars/arca_swiss_rail_accessories/tree/main/STL/Garmin%20Xero%20C1%20Arca%20Adapter

241639

Very happy with the out of box performance from the AI AT-X

241356
241357

I printed some dummy round for myself.

The rim of the 223 dummy round doesn't survive long with UTAS 516, the extractor tends to crack the rim quickly.

For lapua brass, no. Save some time, just load and shoot it.

I have few tips broken off the bullet from factory for batches post covid, about 1 in 500. Those tips are not even included in the bag.

The BC will significantly change without the tip so be...

I buy from Spuhr directly. There is no import permit for the scope rings and the shipping is reasonable.

I'm designing my own powder trickler
235281

It is an open source project. You can find all project files from https://github.com/eamars/OpenTrickler

Yeah the forward assist doesn't really engage with the bolt carrier when the round is not fully chambered.

I got some field test result from my local range yesterday:

PMC 55gr FMJ and XTAC were shooting really bad on UTAS516. Around 3moa at 100yd and chronoed at 3015fps.

PMC 77gr XTAC works...

The thread on the buffer tube was poorly cut. The diameter for the buffer tube is 1.164 which is obviously not a milspec dimension.

The thread is 5.7mm in dia so I guess that's the M6.