Right, so I didn't do anything to bedding (other than check screws etc were tight). But I did test out a couple of different seating depths. Found that seated out a little bit further the 139...
Type: Posts; User: Edunn
Right, so I didn't do anything to bedding (other than check screws etc were tight). But I did test out a couple of different seating depths. Found that seated out a little bit further the 139...
What are the things to trouble shoot there mate? Epoxy bed a potential fix for it?
Will do mate. Did you end up using the load?
Right, so I tested most of those loads. I was getting roughly the results below:
- 130g speer grouping relatively well at low charges. Still cruising at around 2700fps
- 145g speer wasn't a great...
I've learnt a fair bit from this thread as well as talking to a few mates.
First ammunition trial for my Howa 7mm08 16" barrel will be one powder (AR2206H) working up to max/just above max charge...
This is the exact load I was about to work up to in my rifle, so interested to hear that.
I don't have a chrono but will report back on accuracy. If I don't have much joy with 2206 I'll give...