If anyone is experiencing this issue it will be resolved automatically 1-2 hours after you log in and will not recur
Liked On: 20-05-2023, 05:21 PM
I’m shooting the Bergara 44 mag single shot which has a 16.5” barrel and DPT. I would always wear ear pro if I had time, even with subs, but it’s ok. Quiet enough that you can hear the hammer drop,...
Liked On: 28-10-2019, 02:16 PM
If anyone else is heading there soon I found the most sign was low down in the real thick bush where most of the feed was. Up higher there was bugger all but a fair amount of pig sign. Bumped into a...
Liked On: 14-10-2019, 10:02 PM
Would go 150sgk, 150 interlocks or 165s in the same. Epic killers
Liked On: 06-09-2019, 03:57 PM
Just take your dog for a walk we’re it can’t be bonneted normally if you just walk a bit you seem to get onto sign
Liked On: 19-08-2019, 11:19 PM
The spigot that the plastic bush screws into is 32mm diameter
Liked On: 24-06-2019, 03:37 PM
Sounds odd, my old MAE can was 8 inches low and a few right. I put that down to the weight of the thing. Maybe set up a target with plenty of white space around it to see where they are going, it...
Liked On: 24-06-2019, 03:27 PM
Tampons are a bad idea. They are only designed to hold a small amount of blood, and if they come apart in the wound will spread crap everywhere. Use a proper wound dressing, ripped off sleeve,...
Liked On: 15-03-2019, 04:32 PM
Don’t get to carried away with gear keep it small , Good selection of hyperdermic needles & holder , iodine is Wright up there even just 100ml get that on straight away , you can really put a good...
Liked On: 15-03-2019, 06:55 AM
Maybe tweezers to pull out any pointy things, and maybe a pair of latex gloves in case your hands are bloody from a critter, so you don't introduce blood borne nasties into any wound.
Liked On: 14-03-2019, 09:55 PM
I used to carry deer out whole...now more often than not it gets skinned and boned completely on the spot....or as in case of the last 3 the legs stay whole but rest is boned out so it all fits in...
Liked On: 12-12-2018, 07:03 PM
Been working on this for The last few weeks. A 6.5 Grendel on a Howa mini action. Made it for my 7 & 11 years old boys to go hunting with. Tuned the trigger, cut the bolt shroud in half, reprofiled...
Liked On: 09-11-2018, 08:59 PM
I think apart from the elite line the rest are now made in China
Liked On: 08-11-2018, 09:28 PM
Yes the magnum will be a little quieter.
Liked On: 23-10-2018, 08:17 PM
Yes it's hard to get factory 7.62 subs (only seen them once) and most 7.62 barrels seem to be about 1:10 which doesn't like the heavy subs.
Liked On: 23-10-2018, 08:17 PM