roostershooter
Member

60 Likes

Page 1 of 4 1234 Last

• Jump to page:

1. 
   roostershooter liked post by SmokeyJason On thread : Custom cartridges

   Good guy, he'll see you right.

   Liked On: 20-02-2023, 09:50 PM

2. 
   roostershooter liked post by Frogfeatures On thread : 9.3x62 loads

   I’ll post some pics when my Husky arrives. :thumbsup:

   Liked On: 19-11-2022, 08:57 AM

3. 
   roostershooter liked post by Hendrik On thread : Anyone hunting with a 9.3x62

   I noticed this old post and the interest in the 9.3x62. I have published a few Afrikaans journals on the 9.3x62 in South Africa and received great interest international. I decided to publish an...

   Liked On: 01-03-2022, 09:41 PM

4. 
   roostershooter liked post by Shearer On thread : Your cartridge of choice.

   Over my years of hunting I have collected a small range of hunting rifles chambered for cartridges suited to the type of hunting I do. It has not been by conscious choice but I seem to have ended up...

   Liked On: 20-02-2022, 09:32 PM

5. 
   roostershooter liked post by southernman On thread : Anyone hunting with a 9.3x62

   Well had the Sako 9.3 at the range last night, like it a lot, but had quite a bit of trouble, getting consistency, with heavy hand loads, guess the old type Sako ring mounts, couldn't take the...

   Liked On: 08-01-2022, 10:10 PM

6. 
   roostershooter liked post by Tahr On thread : Projectile performance

   Yes. Probably had a blocked nose. :)

   Liked On: 05-01-2022, 09:33 PM

7. 
   roostershooter liked post by NRT On thread : Projectile performance

   That's got the Covid [emoji869][emoji108] Sent from my Nokia 7 plus using Tapatalk

   Liked On: 05-01-2022, 09:33 PM

8. 
   roostershooter liked post by Mathias On thread : Component shortage

   Yeah, I just picked up my 147gr ELD-M for $92 from them today.

   Liked On: 24-12-2021, 08:06 PM

9. 
   roostershooter liked post by Carlsen Highway On thread : Walnut and blued steel,

   When it comes to firearms I only deal in walnut, steel and leather....a random selection: http://i29.photobucket.com/albums/c271/Carlsen/257CU_zpsc7feqlwt.jpg ...

   Liked On: 24-12-2021, 07:54 AM

10. 
    roostershooter liked post by southernman On thread : Anyone hunting with a 9.3x62

    Had the 9.3x62 out today, getting ready for a hunt in next few days, New iron sights installed, still a bit high, so will knock out the .410" sight and put on the .445 tonight, or in morning. ...

    Liked On: 22-12-2021, 06:19 PM

11. 
    roostershooter liked post by john m On thread : Anyone hunting with a 9.3x62

    Very nice. It looks like there's plenty of history with that one. My 9.3x64 28925

    Liked On: 22-12-2021, 06:14 PM

12. 
    roostershooter liked post by Von Gruff Knives On thread : Various Knives

    First decent pic of the 8 inch carving set I took today and will get the rest tomorrow As noted an 8 inch cryo treated NitroV SS carving set with Hickory Burl over brass bolsters ...

    Liked On: 20-12-2021, 06:22 PM

13. 
    roostershooter liked post by jakewire On thread : 9.3x62 loads

    My 65 gr flat of 2209 load gave me just under 2400 two shots an inch apart at 100m then adjusted for a 3" high zero and Gimp and I took a shot each at at steel plate 200yrds away, both hits nearish...

    Liked On: 20-12-2021, 06:17 PM

14. 
    roostershooter liked post by jakewire On thread : 9.3x62 loads

    I ended up at 65.3 of 2209. have to use a drop tube as very compressed, and now that I have a decent chrony not going as fast as I first thought, accurate though and as that's what I like it will do...

    Liked On: 19-12-2021, 07:54 PM

15. 
    roostershooter liked post by john m On thread : Walnut and blued steel,

    I just need to get more ammo,I think it may have gone up a bit. 185234 185236

    Liked On: 06-12-2021, 08:41 PM

Page 1 of 4 1234 Last

• Jump to page: