Why arnt they mounted to your diff?
Type: Posts; User: veitnamcam
Why arnt they mounted to your diff?
a LN106 hilux
It's only amounting pad from memory about 150mm long x 4
Will have to see if I can I find some photos on the old pc.
Should be plenty, I had 40 mm shed40.
Run them as wide as you can get away with, mine were about 30 mm outside the tires so could just turn into a bank on tight tracks and the bar would push the...
My understanding is you have to be a certified welder to affect any repair/modification to structural and it has to be "signed off" by a design engineer but then cars are different.
That depends how you make them I spos? I could and did quiet often lift my whole vehicle with a forklift on each slider to change wheels.
Well I do lots of heavy transport chassis repair/lengthen/shortening so I guess that?
The same basic test is still there and applicable for the same but now if you do overhead you are gifted the other positions which IMO is a bit like "well you can drive a truck so here is your...
Supercharger,major front suspension modification/chassis modification etc etc
If anything needs LVVC cert everything so there is no questions from cops (not that I ever got pulled up) but mainly...
I welded drilled and tapped 20mm plate to the chassis but I am certified welder and the vehicle was being certified for many other mods at the same time.