Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Delta DPT


User Tag List

+ Reply to Thread
Page 4 of 4 FirstFirst 1234
Results 46 to 52 of 52
Like Tree18Likes

Thread: 220 grain ELD-X in 308 win

  1. #46
    Member
    Join Date
    Jun 2019
    Location
    Manawatu
    Posts
    1,076
    So finally, a conclusion to the tests. Got out yesterday and shot the last 6 I had of the 220 ELD-X.

    A charge of 45 grains of Belmont 760 is where I finished up with two shots averaging 2180fps from the 20 inch barrel. Loaded to mag length 2.88 inches with 60 thou of jump. Still no pressure signs! Couldn't get any more powder in there anyway lol

    Could definitely get something to work I reckon, only had 6 left so rather small data group.

    Name:  IMG20210703184530.jpg
Views: 379
Size:  2.31 MB
    Micky Duck and Phil_H like this.

  2. #47
    Member
    Join Date
    Jan 2018
    Location
    Helensville, Auckland
    Posts
    473
    We had the 208 eldm going pretty good out of my mates cheapo savage 308 with 2208, didnt run it over the chronograph but it killed stuff.bullets appeared to be flying with the pointy end first. Haha

  3. #48
    Walking my rifle
    Join Date
    Dec 2015
    Location
    Hamilton
    Posts
    1,243
    i was getting 2450 fps with a 208 amax in a 22" 10 twist. cant remember the load though but it was 2208 for sure. like shooting torpedoes lol
    If you can't kill it with bullets, dont f*ck with it.

  4. #49
    Member Ben_welder's Avatar
    Join Date
    May 2018
    Location
    Oamaru
    Posts
    293
    Shit I only just seen this....
    I ran the 208gr eldm in a howa varmint 10t for ages shot a heap or reds and wallabies with them 2208 in lap lrp brass had them singing at 2630fps. I did mill my mag well out so I could run 80odd mm from.the factory offering.

    I did play with the 225gr eldm with rl19.
    Definitely got them fast enough but couldn't stabilize them in the 10t with the low MV.

    Rl19 got me to around 2600 but would key hole at 100. I can tell you now the recoil was really odd. Really really sharp.

    Any other questions sing out

    Sent from my SM-G991B using Tapatalk

  5. #50
    Member
    Join Date
    Jun 2019
    Location
    Manawatu
    Posts
    1,076
    Quote Originally Posted by Ben_welder View Post
    Shit I only just seen this....
    I ran the 208gr eldm in a howa varmint 10t for ages shot a heap or reds and wallabies with them 2208 in lap lrp brass had them singing at 2630fps. I did mill my mag well out so I could run 80odd mm from.the factory offering.

    I did play with the 225gr eldm with rl19.
    Definitely got them fast enough but couldn't stabilize them in the 10t with the low MV.

    Rl19 got me to around 2600 but would key hole at 100. I can tell you now the recoil was really odd. Really really sharp.

    Any other questions sing out

    Sent from my SM-G991B using Tapatalk
    Was that a 26 inch barrel model? Mine is the 20 inch Sporter. 2630 is pretty awesome from a 308! That's certainly a hammer. I really just wanted to see what would happen and it turns out it would be a viable load with the 220. I would love to have tried the 208s but at the time I couldn't get any.

    I'm honestly amazed at what this value priced rifle is capable of, just about any load I've developed will shoot moa or better with very little mucking around.

  6. #51
    Member
    Join Date
    Dec 2017
    Location
    North Canterbury
    Posts
    2,049
    I didn't see this but used to run the 225 eld ms out of my 1 in 8" 16.5 inch Bergara Single shot. Used to load them over 3" Coal to just off the lands. In Palma brass and around 40 grains of 2208 was getting 2400fps with RL17 and around 2300fps with 2208 they seriously hammered game. Shot a few cham and reds with them before getting lazy going back to shooting the factory Superformance 168 eld m loads. They are soft but I do typically aim for bone never recovered any game but left cricket ball sized exits with regularity our to 350yards. Shot them further working out dope but didn't take game any further. Heard they are a bit harder than the 208s so didn't really want to get down past that 1800fps impact.

  7. #52
    Member
    Join Date
    Jun 2019
    Location
    Manawatu
    Posts
    1,076
    Those are some impressive numbers, the lowly 308 ay?

    Anyhow I was looking through my notes from the last time out and the load at 43 grains gave me 2150 fps...so these may have been going faster than that at 45 grains. Stupid chronograph, always playing tricks on cloudy days

    If I still have this rifle and get to play with the 220s again I'll have to do some long range validation I think.
    Stocky likes this.

 

 

Similar Threads

  1. .224 Sierra 55 grain varmitters swap for 65 grain gamekings, also some .222 stuff
    By Chur Bay in forum Projectile and Factory Ammo Exchange
    Replies: 6
    Last Post: 08-08-2016, 08:36 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!