.260 LAPUA BRASS. 18 inch Barrel.

Hi guys,Anyone reloading this Brass in their .260 18'' barrel?

I run it in my 20" 260

yip I'm using 44grns of 09 with 140grn a max in a tikka.work up as useal

Quote:

---

Originally Posted by doinit

Hi guys,Anyone reloading this Brass in their .260 18'' barrel?

---

Sent from my SM-G960F using Tapatalk

Quote:

---

Originally Posted by buzzman

yip I'm using 44grns of 09 with 140grn a max in a tikka.work up as useal

Sent from my SM-G960F using Tapatalk

---

Hi
I have been a fan of 120 sierra prohunters but always been up there in the pressure department. So loaded up a coupla three with less grains and now accuracy aint great.
I haven't been pulling on a press for decades so now trying to get onto a suitable powder really.

Quote:

---

Originally Posted by doinit

Hi
I have been a fan of 120 sierra prohunters but always been up there in the pressure department. So loaded up a coupla three with less grains and now accuracy aint great.
I haven't been pulling on a press for decades so now trying to get onto a suitable powder really.

---

I also shoot same load with 123 a max as well cheers

Sent from my SM-G960F using Tapatalk

Cheers.

Try H414 or W760 (same powder different label) it seems to run lower pressure for good velocity. I'm running it in a 20" 260 with 120gr Sierra.

Could try the super sauce ;)

Yes, but I’m shooting 147s, so not much help to you

I use lapua brass im my 260 and yes I have an 18 inch barrel
I haven’t tried the 120 pro hunter in the lapua brass but I tried it when i was running remington brass the problem was because if the stubby nose on the pro hunters i had to seat them very deep in the case to get them to chamber in the gun
Like way shorter than mag length
That’s why I didn’t continue testing them my rifle was specially chamberd for a match type pill amax etc seated to mag length

Quote:

---

Originally Posted by rambo-6mmrem

I use lapua brass im my 260 and yes I have an 18 inch barrel
I haven’t tried the 120 pro hunter in the lapua brass but I tried it when i was running remington brass the problem was because if the stubby nose on the pro hunters i had to seat them very deep in the case to get them to chamber in the gun
Like way shorter than mag length
That’s why I didn’t continue testing them my rifle was specially chamberd for a match type pill amax etc seated to mag length

---

Interesting..thank you.

Quote:

---

Originally Posted by gimp

Yes, but I’m shooting 147s, so not much help to you

---

What sort of velocity?

I use 760 or h414 same shit
A max charge is only to the shoulder which leaves plenty of room for a bullet
A 130gn berger vld or 123 a-max/sst is seated quite deep to fit a standard 08 length mag

Info might not be any good to you but, 260 19" Barrel, Lapua Brass, 2209 and 140VLD

All imfo I appreciate Cliff,,something will come from it all.

@gimp details on the 147gn load?

Lapua brass. 44 grain 2209. 147 eld m. 20 inch barrel. 2700fps.

Quote:

---

Originally Posted by Ginga

Lapua brass. 44 grain 2209. 147 eld m. 20 inch barrel. 2700fps.

---

magic round that one

Sent from my SM-G960F using Tapatalk

Yeah mate. Backed your load off 1/2 a grain! That rifle of yours shoots for sure. And consistently