Thread: 260 Rem Neck up or Down

so with factory rem 7mm08 brass would i be ok with sizing the 7mm08 to .260 without neck turning, i want to try it but i dont want to get a stuck case in my dies or stuff them in any way.

Originally Posted by tonyd

so with factory rem 7mm08 brass would i be ok with sizing the 7mm08 to .260 without neck turning, i want to try it but i dont want to get a stuck case in my dies or stuff them in any way.

As long as you lube it properly you wont have any trouble with your dies.

You only need to neck turn if the loaded neck is too big for your chamber.