Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

ZeroPak Terminator


User Tag List

+ Reply to Thread
Results 1 to 9 of 9
Like Tree2Likes
  • 2 Post By chainsaw

Thread: 284 Win loads and barrel length

  1. #1
    Member
    Join Date
    Feb 2021
    Location
    Stratford
    Posts
    141

    284 Win loads and barrel length

    Are there a few of you that will be willing to share your 284 Win loads and barrel length? What would the minimum and ideal barrel length be according to you guys?

  2. #2
    Member Magnus's Avatar
    Join Date
    Nov 2018
    Location
    wellington
    Posts
    1,190
    I'm just running a bergara scout that was rechambered from 7mm08, 22 inch barrel, only loaded it with RL19 to max in the hornady manual, 150gr nosler BT has been long throated so now attempting to push past the manual max. No pressure signs yet. Love it wish I had it going ages ago.
    Cursed be the ground for our sake. Both thorns and thistles it shall bring forth for us. For out of the ground we were taken, for the dust we are... and to the dust we shall return.

  3. #3
    dog chaser distant stalker's Avatar
    Join Date
    Dec 2011
    Location
    Chch
    Posts
    2,000
    19" 2750 fps 162gr amax, with 2209
    Hit pressure with re17 at 2900

  4. #4
    Member
    Join Date
    May 2015
    Location
    Nz
    Posts
    2,952
    19" 2770 162eldm with 2209.
    Got 2 much more accurate loads doing between 2750 and 2800 using 150SGK and 145 speer HCSP with 2209 and 2208.
    I wouldn't go shorter than 19/20" personally.

  5. #5
    Member
    Join Date
    May 2020
    Location
    South Taranaki
    Posts
    11
    I’ve got a .284 on a tikka 16inch barrel throated long, rl17 53 or 53.5g 150g eld-x can’t quite remember shooting 2650fps pressure issues going any higher than this. Also shoots the SGK 150g really well with the same load.

  6. #6
    Member stagstalker's Avatar
    Join Date
    Jul 2018
    Location
    North Island, New Zealand
    Posts
    2,132
    17” had 162 ELD-M at 2750fps with Rel 17. Settled on a slower load with 2209 though. If I was going to build one again it would be 18”.

  7. #7
    Member Reloader75's Avatar
    Join Date
    May 2020
    Location
    Rolleston, Canterbury
    Posts
    303
    Probably not relevant to your rifle and barrel length but I have a Howa long action rebarreled with a 28” Trueflight

    162 eld-m’s or 168 Bergers

    2209, 2213 and 100v all making 3000

    All .5 or under, can’t decide between them


    Sent from my iPhone using Tapatalk

  8. #8
    Member chainsaw's Avatar
    Join Date
    Jul 2014
    Location
    Norf
    Posts
    5,457
    20in bbl RE17 or Superformance gets me ~2830 FPS with 160TmKs or 162AMAX.
    This was consistent across 2 different rifles REM700 & MK5 Weatherby wearing 20in bbls. For comparison my Tikka 284 (not a factory bbl) I rebarreled at 22 in. This gets me 2930 FPS with 160 - 162gn pills with RE17.

    “Best” bbl length is really a question about your intended use & type of hunting. If you’re a bush hobbit and want to occasionally reach out to 5-600 yds then 18in would suit well. But if you’re alpine tops hunting and want 7-800 or more then you would be better off 20+. Horses for courses
    GWH and superdiver like this.

  9. #9
    Member
    Join Date
    Jan 2019
    Location
    Auckland
    Posts
    317
    As per Chainsaw

    My latest 284 has 20inch and is an Alpine/all-rounder

    With RE16 and 162 ELDX it will do 2800fps
    With 760 and 162 ELDX it will do 2700fps
    With RE16 and 140 BTs it’s accurate at 3000fps

    CraigC has the Ultimate Rig and we are waiting a write up

 

 

Similar Threads

  1. Barrel length
    By Ace86 in forum Projects and Home Builds
    Replies: 11
    Last Post: 28-04-2020, 10:03 AM
  2. .243 Barrel length, over barrel or forward mount suppressor
    By Strider B in forum Projects and Home Builds
    Replies: 12
    Last Post: 14-04-2018, 01:52 PM
  3. Minimum legal barrel length and overall length for firearms
    By A.J.P. in forum Firearms, Optics and Accessories
    Replies: 65
    Last Post: 27-07-2015, 12:30 PM
  4. 308 barrel length
    By Hunty1 in forum Firearms, Optics and Accessories
    Replies: 28
    Last Post: 12-10-2013, 08:24 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!