I haven't tried it simply because I have no 308 brass at the moment, but is there any reason why I couldn't use a 30 06 seater to seat bullets in 308 brass?
Cheers.
Printable View
I haven't tried it simply because I have no 308 brass at the moment, but is there any reason why I couldn't use a 30 06 seater to seat bullets in 308 brass?
Cheers.
it will work other way around.......depth of die would be only thing I can see stopping it...you may not be able to screw adjustment down far enough to push projectile deep enough...try it with loaded round and see if it will make contact..that will answer question I would think.
Ahh good thinking Micky I never thought of that.
I don't actually have any 308 factory either but I'm sure I could rustle some up in the neighbourhood to give it a try
I have 300win mag ammo, but that's not really the same thing.....:)
You might find the the .308 case has less tapper than the 30/06 and jambs in the seater, Though I think the Hornady seaters are straight to work with the
bullet guide, Mr Google can help there
Ok thanks, will be careful with that
There are two hornady seaters for 308 size and 30 06 size, they have different numbers, it is the hornady 30 06 size seater I have.
The neighbour is sizing me a couple of 308 cases as we speak so I'll know shortly.
I wise man told me when I was starting out all those years ago that one of the first things I should buy was a stuck case remover, used it bugger all, but when you need it your stuffed without it. I encourage all newbies and most oldies to have one on hand
Never used one in a seater though? always a sizer, first time for most things I suppose.
.
hmmm this could be why I could squeaze body of .308 brass in tiny bit more in old Lyman .30/06 dies......diamentions say it doesnt...but it did.pretty sure the hornady dies are generous in size...Quote:
Originally Posted by shooternz
Ok, for anyone that is interested my Hornady 30 cal seater #044112 bought as a 30 06 seater easily seats bullets in a 308 case way down past 308 COAL without any trouble with the case taper.
Ha, not often I have a $ win
I checked with my Hornady 300 Blackout seater today it will seat bullets in any size case as only the neck inters the die not the whole case body.Quote:
Originally Posted by jakewire