Thread: 30 nosler vs 300 blaser magnum brass/ dies questions

Originally Posted by Kiwi Greg

Norma make the Nosler brass, Nosler prep & weigh it etc, which is a good excuse for it to be twice the price

So hopefully norma start stamping their own name on it soon. Some good mark up alright.

Originally Posted by Tim Dicko

So hopefully norma start stamping their own name on it soon. Some good mark up alright.

Not sure when we will see Norma 28 Nosler brass, you can get Bertram brass which is not too bad.

If you get 5-6 firings out of a bit of 28 Nosler brass 100 will last you the life of the barrel so its not really the end of the world

Originally Posted by Kiwi Greg

Not sure when we will see Norma 28 Nosler brass, you can get Bertram brass which is not too bad.

If you get 5-6 firings out of a bit of 28 Nosler brass 100 will last you the life of the barrel so its not really the end of the world

Thats a good way of looking at it. I though bertram brass wasnt the best?

300 PRC AKA 30-375 Ruger is same performance as those two... might be easier to get stuff for?

Originally Posted by 300_BLK

300 PRC AKA 30-375 Ruger is same performance as those two... might be easier to get stuff for?

i know where there is a reamer too

The 7mm version can shoot with out a bake

Originally Posted by 300_BLK

300 PRC AKA 30-375 Ruger is same performance as those two... might be easier to get stuff for?

Thats getting fairly wild catish a. dont really want a cat fish. think it would be a pain for getting brass ect.?

Originally Posted by Tim Dicko

Thats getting fairly wild catish a. dont really want a cat fish. think it would be a pain for getting brass ect.?

Eaiser to get brass for than anything else mentioned in this thread.

Originally Posted by BRADS

Eaiser to get brass for than anything else mentioned in this thread.

there no simple one answer. You want power but not to much recoil. maybe be able to use a suppressor . or a break.

Originally Posted by 199p

i know where there is a reamer too

The 7mm version can shoot with out a bake

It would still boot like shit wouldnt it? The 7mm would be a barrel burner surely?

Originally Posted by Tim Dicko

It would still boot like shit wouldnt it? The 7mm would be a barrel burner surely?

Mine was shit but shootm is lasting well, Heaps of guys states side got 1200+ rounds.

Nah wasnt bad at all i shot it more with out the brake then with great performance from a 26" barrel

My question is how many rounds are you going to fire a year?
Even if it’s 100 per year 10 years before you have to screw another barrel on at 1000 rounds.
That’s what I’m working on for my 7-375.
I’ve had a look back and it’s four years since it was built and pretty close to 400 rounds so far and that’s my hunting rifle.

Originally Posted by Shootm

My question is how many rounds are you going to fire a year?
Even if it’s 100 per year 10 years before you have to screw another barrel on at 1000 rounds.
That’s what I’m working on for my 7-375.
I’ve had a look back and it’s four years since it was built and pretty close to 400 rounds so far and that’s my hunting rifle.

The simple answer to that is not i have a kid less than i was. 100 a year on that rifle is about right theese days. thats some pretty logical thinking a. has the throat moved?

Originally Posted by Tim Dicko

The simple answer to that is not i have a kid less than i was. 100 a year on that rifle is about right theese days. thats some pretty logical thinking a. has the throat moved?

Haven’t had a look with a bore scope and not going to. Just keep shooting and replace it when it stops shooting is my theory.

300 PRC has just been released by Hornady. Dies and brass are easy to get.

Originally Posted by 300_BLK

300 PRC has just been released by Hornady. Dies and brass are easy to get.

just looked it up nice cheers for that. good old hornady. we will see if it catchs on.