Printable View
After a bit of advice on which projectiles I should start with and what benefits there are in each, please.
I’m keen on the Nosler Accubond and Partition in either 260 or 300 grain. I’d like something that’ll get me to 400-500yds but most of my hunting I like getting in close.
Check out Terminal Ballistics Research https://www.ballisticstudies.com/Kno...nd+Magnum.html
@Kiwi Greg had some 235gr hotcors screaming along and accuracy was very good too.
I personally had a good run with the hornady 270gr projectiles, they were doing 2700 out of the 375 ruger so not too different to the 375h&h.
I have only shot targets with my ones so can't comment on terminal performance
It really depends what you are wanting to shoot with it, a Red Deer or Pig would want a softer projectile than say a Wild Bull
I hear your old man has brought himself a new rifle too.Quote:
Originally Posted by Benfransham
Whilst those projectiles are the pick of the bunch BC wise they're too stout for the soft skin game we have here. As an all rounder that will open up you're probably better to go with a good old cup and core soft point.Quote:
Originally Posted by Benfransham
What about the Sierra 200gr? Initially I’ll only be shooting as far as my Aimpoint can get me, don’t have the disposable money to scope it up nicely just yet!!Quote:
Originally Posted by mawzer308
He has, just got to get him out to use it now. Been planning something together but both our jobs combined make it damned near impossible!Quote:
Originally Posted by outdoorlad
They're designed for calibres like 375winchester etc at slow to moderate speeds they're fine but at h&h velocities they'll come apart. Try looking at the 225gr Hornadys, 235gr hotcor speers or 270gr Hornady sp.Quote:
Originally Posted by Benfransham
I'm hoping that, got some to try :)Quote:
Originally Posted by mawzer308
I understand they a fair aggressive at 375 Wsm velocities :) @mikee
200gn sierra +3000fps = 8 inch hole in neck/shoulder junction that you can actually look thru!! Deer never even moved. I am now trying 250ttsx but i think they will be a bit tough as the best speed i can get is 2700 and that is really pushing itQuote:
Originally Posted by Kiwi Greg
They were not that accurate compared to the ttsx either.
If only using a scope that keeps you fairly close, you could use heavy gas checked projectiles at lower velocities or the Sierra 200gr. With a 200 or 300gr pill even at 1500- 2000fps it is going to be like a flying hammer when it hits..But I will admit, downloading a large cal like the 375 is not why you bought a 375...
I shoot 300gr norma oryx out of mine at 2550 fps on rabbits to deer drops every animal on the spot. Tried 270gr 1.5" at 100, 300gr 0.7" at 100 I take accuracy over speed any day.
I've never shot anything over 200 yds with mine. Using 280gr Woodleigh handloads and just boxed 300 grainers.
Dropped shitloads of pigs, dingo's, donkeys, horses and Buff.
Runs at around 2600 by memory.
Blows bloody big holes in things, like the Kill Bill movies actually.
Someone was selling 375 cast lead bullets on Trademe, if you don't want to cast your own.
It shoots beautifully with 300gr pills and I’m not downloading for recoil issues, just have no idea what projectiles will be best for NZ critters. Big nasty pills are quite inticing but more expensive ha
I found in my 303 a Woodleigh 215gr round nose was devastating in larger critters...(My rifle was nicknamed Hammer by those who were with me) I'll probably use something similar in the 375....maybe a bit bigger but RN.Quote:
Originally Posted by Benfransham
Sorry I put you crook with some details - Woodleigh 270gr PP - doing 2620fps - 79.3 grains AR2209 - Energy 4114 ft lbsQuote:
Originally Posted by 300winmag
I’ve grabbed some Speer 235gr Hot-Cor projectiles, would anyone please be able to advise me on a starting point with what and how much powder for a load?
Plenty of data here, http://www.adi-powders.com.au/handlo...H+%26+H+MagnumQuote:
Originally Posted by Benfransham
Thank you very muchQuote:
Originally Posted by Kiwi Greg