Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Delta Terminator


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 18
Like Tree15Likes

Thread: 6.5 creedmoor

  1. #1
    Caretaker - Gone But Not Forgotten jakewire's Avatar
    Join Date
    Dec 2011
    Location
    here
    Posts
    7,477

    6.5 creedmoor

    Just curious
    For those that are loading for their Creedmoor in the 140-147gr range, what are the powders that go best ?
    2209? and the like maybe.
    Anyone use H4831?
    Quis custodiet ipsos custodes?

  2. #2
    Member
    Join Date
    Aug 2022
    Location
    New Plymouth
    Posts
    1,186
    Hodgdon superprofrmance or RL26 give really good speeds and shoot well and it seems easy to get.

    Sent from my CPH2145 using Tapatalk
    jakewire, Swanny and will.i.em like this.

  3. #3
    Caretaker - Gone But Not Forgotten jakewire's Avatar
    Join Date
    Dec 2011
    Location
    here
    Posts
    7,477
    Thanks
    Never thought of superformance. RL26 is a bit scarce I believe.
    Quis custodiet ipsos custodes?

  4. #4
    Member
    Join Date
    Aug 2022
    Location
    New Plymouth
    Posts
    1,186
    Quote Originally Posted by jakewire View Post
    Thanks
    Never thought of superformance. RL26 is a bit scarce I believe.
    Just watch superprofrmance if you load to a max in the summer.
    You can push a 143 eldx to around 2800 fps with it from a 20"

    Sent from my CPH2145 using Tapatalk

  5. #5
    Member
    Join Date
    Feb 2021
    Location
    Carterton
    Posts
    40
    H4350 (2209) & RL16 would the typical powders for 6.5CM, both in the same burn rate bracket. Have had great results with RL16
    jakewire and Steelisreal like this.

  6. #6
    LBD
    LBD is offline
    Member LBD's Avatar
    Join Date
    Jun 2015
    Location
    Murchison
    Posts
    769
    I have had good success with both RL16 and RL26... ten sold the 6.5 before powder got scarce... new 6.5 should be here by Christmas.
    jakewire likes this.

  7. #7
    Member
    Join Date
    Jul 2013
    Location
    Godzone, South Island
    Posts
    1,705
    Superformance works great. Its available, it meters well, it usually gives you a gain in speed with less pressure signs. But if you do get up there you can reach max loads very fast. And it is temperature sensitive, no problems if you keep your rounds cool in summer, like an insulated bag if your in to some of the long range shoots. 44.7gns gave me very consistent loads and an average speed of 2750 with 147's. And I could go faster, but why change something that works.
    jakewire, Moa Hunter and Mathias like this.

  8. #8
    Member
    Join Date
    Aug 2012
    Location
    Christchurch
    Posts
    4,467
    2800 with 2209 and 147 grain

  9. #9
    Member
    Join Date
    Nov 2015
    Location
    Waikato
    Posts
    683
    2209 and rl16 for me. Better velocities with the rl16
    Steelisreal likes this.

  10. #10
    Caretaker - Gone But Not Forgotten jakewire's Avatar
    Join Date
    Dec 2011
    Location
    here
    Posts
    7,477
    Cheers all
    Quis custodiet ipsos custodes?

  11. #11
    57JL
    Join Date
    Feb 2015
    Location
    TOP END
    Posts
    838
    Winchester 760 works well for me
    jakewire likes this.

  12. #12
    Gone But Not Forgotten
    Join Date
    Feb 2014
    Location
    Taupo
    Posts
    1,887
    Quote Originally Posted by Mick Hunter View Post
    2209 and rl16 for me. Better velocities with the rl16
    Same here. Use 2209 for reduced target loads and RL16 for hunting. Have RL26 which gives the fastest velocities but don't see the need to shorten barrel life for an additional 75 fps.

    I see that Workshop Innovation has the Winchester 6.5 Staball in very limited amounts.

  13. #13
    Member Sideshow's Avatar
    Join Date
    Apr 2015
    Location
    UK
    Posts
    7,913
    I’ll dig up lathe load I sorted for a mate. Post tomorrow have a duel with some fallow bucks at dawn. Wish me luck
    It's all fun and games till Darthvader comes along
    I respect your beliefs but don't impose them on me.

  14. #14
    Caretaker - Gone But Not Forgotten jakewire's Avatar
    Join Date
    Dec 2011
    Location
    here
    Posts
    7,477
    Hope you had Good Luck @Sideshow
    Quis custodiet ipsos custodes?

  15. #15
    Member Sideshow's Avatar
    Join Date
    Apr 2015
    Location
    UK
    Posts
    7,913
    Nar no luck today not for lack of trying……there’s one black bitch up there that come doe season she’s the first to get it……..

    Right load data: Please note that this load worked in the below rifle. It might not work in yours.
    Rifle: 6.5 man bun sako
    Bullet:120g Barnes TTSX
    Primer: Remington 9 1/2 LR
    Powder: N555
    Start load: 40.3gr
    Max: 44.6gr

    We found the best for his rifle 42gr.

    Here’s the data from the manufacturer!

    https://www.vihtavuori.com/reloading...?cartridge=102

    Hope this helps.
    jakewire likes this.
    It's all fun and games till Darthvader comes along
    I respect your beliefs but don't impose them on me.

 

 

Similar Threads

  1. 6.5 CREEDMOOR
    By tetawa in forum Firearms, Optics and Accessories
    Replies: 7
    Last Post: 12-03-2019, 06:02 PM
  2. 308 to 6.5 creedmoor
    By Paddy79 in forum Questions, Comments, Suggestions, Testing.
    Replies: 12
    Last Post: 13-09-2017, 07:34 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!