What's the right bush to get for the redding competition neck die for 7 saum. Using 7 saum Norma brass. Also have some 300 saum Norma to neck down as well.
I see some use .314 bush.
Cheers
Tom
Printable View
What's the right bush to get for the redding competition neck die for 7 saum. Using 7 saum Norma brass. Also have some 300 saum Norma to neck down as well.
I see some use .314 bush.
Cheers
Tom
Measure the neck of a loaded round then get a bushing .002" smaller that is the recommended way of doing it, if you still have the expander button
installed you can go smaller
Ok thanks.
Get a few sizes under your measure as well Tom. So say you need. 314 for a 2thou grip, get bushings down to 310Quote:
Originally Posted by Ginga
If you have a full case or ever change your load 2 thou won't cut it with some brass types and projectiles.
You also might find a bit more tension than recommended will shoot better with some combos of brass and projectiles.
Sent from my SM-G935F using Tapatalk
Righto Dave ta. Tried to ring you the other day.
I was out of service for a few days pretending to be a fisherman[emoji16]Quote:
Originally Posted by Ginga
I am around for the rest of the week[emoji106]
Sent from my SM-G935F using Tapatalk