Thread: 7PRCW or 7/6.5PRC

Who's playing with this making waves in US PRS with good available brass from Norma/Lapua and easy to neck up. Have ordered the reamer and guages and will build a hunting rifle. A bit like a modern WSM/SAUM but with easy to get brass.
Also 6.5PRC was not performing as Hornady advertised.

I had a 7-6.5PRC built. Haven't gotten around to firing it and doing load development. But will be running the 175gr bergers

Originally Posted by lau lau

I had a 7-6.5PRC built. Haven't gotten around to firing it and doing load development. But will be running the 175gr bergers

How long a tube ?

24inch. Being set up as a hunting rifle

Originally Posted by lau lau

24inch. Being set up as a hunting rifle

Will be deadly

That sounds pretty cool be interesting see how it goes


Sent from my iPhone using Tapatalk

Will update when it's sorted building on a long action so no magazine constraints with big bullets. US guys are using Berger 180s with Vih 555 and getting 2900 fps but with a 32" tube. I'm thinking a 25" tube with Muzzle brake and using 180 eldm.

What was the issue the 6.5 prc? A mate has one in a bergara, 21.5 inch barrel, putting rounds through the same hole but only doing 2670

Originally Posted by Jus

What was the issue the 6.5 prc? A mate has one in a bergara, 21.5 inch barrel, putting rounds through the same hole but only doing 2670

Thats the issue a .260 will do an honest 2800 with an 18-20" tube . As for the 7 6.5prc I understand its popular over their due to lack of 7saum brass more than anything would be my guess? Iv only seen numbers once and I cant quote them but it was a fair bit slower than the saum and a heap slower than the wsm

Originally Posted by Jus

What was the issue the 6.5 prc? A mate has one in a bergara, 21.5 inch barrel, putting rounds through the same hole but only doing 2670

Exactly it's anemic but very accurate.

Originally Posted by Jus

What was the issue the 6.5 prc? A mate has one in a bergara, 21.5 inch barrel, putting rounds through the same hole but only doing 2670

That is bloody anemic! Is that with factory ammo or a handload? Mine chucks 153gr at 2950 from 22"....have had 3k but brass life wasn't good.

He only shoots factory, those were eld-m

In saying that the 7mm creed seems bloody epic so could have potential can any one quote performance?

Originally Posted by Kelton

In saying that the 7mm creed seems bloody epic so could have potential can any one quote performance?

My 7mm creed is throwing the 160gr tmk @2830fps from a 25inch barrel

My 7 prc is doing 2830 out of a 20” barrel with a 175 berger. 2890 with factory eld x 175. Anyone have any ideas why the 6.5 prc is so slow in short barrel? Would handloading change much? Not to hijack your thread mate