Thread: 9mm Luger Load Data with IMR X700 Powder?

Has anyone got any load data for 9mm Luger for 115JHP Zero projectiles and 124 FP Frontier's?
There is a reasonable amount of data on line but the recommended charge weights are all over the place.
I will probably start with 4.2gn loaded to 1.1" OAL with the 115 Zero's to start with.
Plenty of other better powders around I know but I picked up around 20lb of it on trade me for $80 some time back. I use it for 12g shot gun reloads but also want to burn it all up in a 9mm.
Enough to load 33000 rounds so it should last a year or two.

It works ok I load it in 9mm .357 and .45 acp, just start a little low and work up it's pretty quick burning so take it in small steps, I don't use those projectiles so can help with data,
I started at 3.2 gr with a 124 gr and a 115gr and work up in .2gr steps each gun is different so can't recommend a maximum load, work up until you get 100% functioning and fine tune
for accuracy

Wish I got 20lb for that cheap, runs well in my cz75 and I really liked the light recoil impulse at minor loads. From memory was 3.4gr but loads will vary on different guns, was very dirty though

800x is better you getgood vilosity andlow presure from imr you cant get enough 800 into cartridge to do damage