Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

DPT Alpine


User Tag List

+ Reply to Thread
Page 3 of 3 FirstFirst 123
Results 31 to 42 of 42
Like Tree60Likes

Thread: Advice 30-06 0-500yards load

  1. #31
    Member
    Join Date
    Aug 2012
    Location
    helensville nz
    Posts
    4,375
    any hunting bullet with a decent bc will do that sort of distance from a 30-06
    doesn't need to be a match bullet

    try the speer gold dot they have a stunning bc for a soft point hunting bullet
    kill awsome too

    yet to meet a rifle that doesn't like them ether
    caberslash likes this.

  2. #32
    Member
    Join Date
    Feb 2013
    Location
    Mangakino
    Posts
    1,720
    Have to laugh this thread answer most of the other threads on here.
    A 30-06 appears to do well with any powder projectile combination.
    Nothing else needed.
    I admit to being slightly biased.
    Micky Duck and dannyb like this.

  3. #33
    Unapologetic gun slut dannyb's Avatar
    Join Date
    May 2018
    Location
    Oxford, North Canterbury
    Posts
    8,533
    Quote Originally Posted by superdiver View Post
    178eldms would be epic with some 2209.
    any reason to think they wouldn't work with Superformance ?
    #DANNYCENT

  4. #34
    Member
    Join Date
    Dec 2019
    Location
    Okawa Hawkes Bay
    Posts
    2,700
    Quote Originally Posted by dannyb View Post
    any reason to think they wouldn't work with Superformance ?
    Greetings @dannyb,
    Rather than lusting after powders you don't have and probably can't get why not just go with the AR2208 that you do have. Almost all military cartridges for the 30-06 were loaded with powders no slower than AR2206H. You would give up less than 100 fps with the lighter projectiles and only a little more with the 178 or 180 grains. Move over to AR2209 when you can get some. The deer won't know the difference.
    Regards Grandpamac.
    PS I believe that the Superformance we can buy was the blend formulated for the 30-06 so it should work well.

  5. #35
    Unapologetic gun slut dannyb's Avatar
    Join Date
    May 2018
    Location
    Oxford, North Canterbury
    Posts
    8,533
    Quote Originally Posted by grandpamac View Post
    Greetings @dannyb,
    Rather than lusting after powders you don't have and probably can't get why not just go with the AR2208 that you do have. Almost all military cartridges for the 30-06 were loaded with powders no slower than AR2206H. You would give up less than 100 fps with the lighter projectiles and only a little more with the 178 or 180 grains. Move over to AR2209 when you can get some. The deer won't know the difference.
    Regards Grandpamac.
    PS I believe that the Superformance we can buy was the blend formulated for the 30-06 so it should work well.
    I do have 4lbs of Superformance now....
    #DANNYCENT

  6. #36
    Member
    Join Date
    May 2015
    Location
    Nz
    Posts
    2,949
    Quote Originally Posted by dannyb View Post
    any reason to think they wouldn't work with Superformance ?
    Never thought it wouldn't but 2209 seemed to be the go to. Keen to see how SF goes in it. What pill you going with?

  7. #37
    Member
    Join Date
    Jul 2014
    Location
    BOP
    Posts
    3,914
    That was a good score Danny, my load with SF is 58 grains with the 178 gr ELDX , velocity average is 2780 fps.
    dannyb likes this.

  8. #38
    Unapologetic gun slut dannyb's Avatar
    Join Date
    May 2018
    Location
    Oxford, North Canterbury
    Posts
    8,533
    Quote Originally Posted by superdiver View Post
    Never thought it wouldn't but 2209 seemed to be the go to. Keen to see how SF goes in it. What pill you going with?
    At the moment its a toss up between 178 eldm or 175 targex as thats what I can lay my hands on.....The only eldx I could find anywhere was 200gn and I think that whilst it may work it also may not...
    #DANNYCENT

  9. #39
    Member
    Join Date
    Jul 2014
    Location
    BOP
    Posts
    3,914
    Quote Originally Posted by dannyb View Post
    At the moment its a toss up between 178 eldm or 175 targex as thats what I can lay my hands on.....The only eldx I could find anywhere was 200gn and I think that whilst it may work it also may not...
    I tried the 200 gr eldx in my Ruger American and got good speed with SF but it didn't shoot well at all.

  10. #40
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    22,596
    careful......them partitions DO contain some magic...... its only my Scottish heritage that stops me using them....
    dannyb and caberslash like this.

 

 

Similar Threads

  1. 7mm08 load advice ?
    By dannyb in forum Reloading and Ballistics
    Replies: 36
    Last Post: 18-06-2021, 04:25 PM
  2. Replies: 14
    Last Post: 18-09-2020, 09:03 PM
  3. .270 ELD-X Load Advice Please
    By Spitfire in forum Reloading and Ballistics
    Replies: 7
    Last Post: 26-05-2020, 10:25 AM
  4. 500 BPE load advice
    By akaroa1 in forum Reloading and Ballistics
    Replies: 66
    Last Post: 03-03-2020, 06:36 PM
  5. 300 win mag load advice
    By PerazziSC3 in forum Reloading and Ballistics
    Replies: 13
    Last Post: 09-11-2019, 07:25 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!