If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed.
for my 708 i used a salt annealing method .had it hot around 900F with a 15 count i then resized and used a mandrel 283 and it took about 150 psi to seat bullets . may seem a tad high but thats what the new brass was taking . i sized a brass with out annealing ,took a good deal more psi to seat that bullet
I'm doing my salt bath considerably hotter at 550c and about 7 seconds, but using an aftermarket controller on my lee lead pot the standard pot controller is trash
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!
Bookmarks