Thread: Annealing questions

Originally Posted by ebf

Breyt, I think you misunderstand what I said. Each case IS slightly different - so having a consistent amount of time in the flame is exactly what I do not like about machines... Let's face it, brass cases are extruded from material that is not exactly consistent.

If you have a bunch of cases that have all been neck turned extremely carefully, a machine may well get reasonably close. Take those same cases on a different day and run the machine with the same settings and you could be cooking your brass... So to be safe, each time you use the machine you need to tune the timing cycle using tempilaq or something similar.

i have to disagree with your statement! Doing it by hand has a far beter change cooking your cases than a machine. Its like building a car by hand it takes ages and you make far more mistakes that the machine ever can unless your set up was wrong; You don't need any skills to set up Auto annealing Machine