Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Darkness DPT


User Tag List

+ Reply to Thread
Page 3 of 3 FirstFirst 123
Results 31 to 38 of 38
Like Tree17Likes

Thread: Another what load thread 243

  1. #31
    Member
    Join Date
    Dec 2019
    Location
    Okawa Hawkes Bay
    Posts
    2,733
    Quote Originally Posted by blip View Post
    I might up the varget and see what happens. It might of been a bit low for this rifle, It was accurate enough but the necks were a little bit sooty
    Greetings,
    From my testing in the .308 the ADI powders, including AR2208 seemed to shoot a bit better than IMR4064 at lower pressure and AR2208 looks the best of the bunch from your results. One thing you could consider though is a better target. These days I mostly use the NZDA 50 and 100 metre targets but you can make up a hollow square target with red tape on paper. I just quarter the inside of the circle or square with the cross hairs and find this more accurate than trying to aim at a fine point.
    Regards Grandpamac.
    Ruger7mm, Micky Duck and 30.06king like this.

  2. #32
    Member
    Join Date
    Jun 2023
    Location
    waimakau
    Posts
    2,639
    I find if I have a cross as I use as a target once my crosshairs are perfectly lined up with the cross on the target I'm aiming at a precise point not somewhere inside a circle and the aiming point will be exactly the same every time. That's my theory anyway and seems to work for me...

  3. #33
    Member
    Join Date
    Jun 2023
    Location
    waimakau
    Posts
    2,639
    I know varget and 2208 are the same is 4064 different?

  4. #34
    Member
    Join Date
    Dec 2019
    Location
    Okawa Hawkes Bay
    Posts
    2,733
    Greetings,
    Yes it is. IMR4064 was originally made by Dupont in the US from about the 1920's and was the go to powder for the .270 for a while until IMR4350 came out. AR2208 has been made by Mulwex, now ADI in Australia since the early 1980's. From my testing IMR4064 can be a little faster than AR2208 but is bulkier and not as temperature stable. I used IMR4064 in my .308 from the late 1980's and got good velocity and accuracy at book max loads but it needed to be compressed. I changed to AR2206 and later AR2206H, far better powders for sub max loads.
    Regards Grandpamac.
    A330driver likes this.

  5. #35
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    22,807
    try an X rather than a cross on target...it works surprisingly well if have bold cross hairs and/or low magnification
    75/15/10 black powder matters

  6. #36
    Member BRADS's Avatar
    Join Date
    Oct 2012
    Location
    Central Hawkes Bay
    Posts
    9,306
    Quote Originally Posted by 7mmsaum View Post
    95g Nosler BT and H1000 or adi 2217 is a winning combo at 3100 fps
    That's what I use now

    Sent from my SM-S916B using Tapatalk
    7mmsaum likes this.

  7. #37
    Member
    Join Date
    Jun 2023
    Location
    waimakau
    Posts
    2,639
    Tried a different load today as they needed to be used up. 80gn rem cor loks 36gn varget gave 1" groups ave 2818fps.
    may be sarcastic may be a bad joke

  8. #38
    Member
    Join Date
    Jun 2019
    Location
    Manawatu
    Posts
    1,078
    2208 goes really well in the 243. I've been loading the 105 Targex with it, 2910fps average out of a 20 inch barrel does well. Load is getting up there at 39.5 grains.

 

 

Similar Threads

  1. Thread Help
    By Rwt in forum Firearms, Optics and Accessories
    Replies: 11
    Last Post: 22-04-2024, 11:32 PM
  2. What's my thread?
    By Remmodel7 in forum Firearms, Optics and Accessories
    Replies: 9
    Last Post: 05-03-2022, 01:54 PM
  3. Another Lever Action thread question. Wanted to avoid thread drift
    By ZQLewis in forum Firearms, Optics and Accessories
    Replies: 11
    Last Post: 29-03-2019, 09:41 PM
  4. What thread is this?
    By Ryan_Songhurst in forum Firearms, Optics and Accessories
    Replies: 2
    Last Post: 07-05-2016, 01:31 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!