Thread: Arbor Press

Excellent article, and some sound advice...

Triton super jaws make a good base for a portable reloading "bench". Mount your press to a thick board, screw a length of 2x4 to the bottom, and clamp that in the super jaws.

Forster Co-Ax if you are going to the trouble of reloading there is no other choice. Price well it will last a life time and you will be able to hand it on. Not to sure about the comments made about mixing up the reloads from one press to another but at the end of the day if you don't have a sound understanding on reloading in the first place quality equipment will not change the outcome. A little test that may assist place a dial indicator on the shaft at the top of the stroke , then half way down with pressure on the shaft in one direction and let it spring back and then check how much movement is in the shaft all this equals consistency, if that is not important use factory ammo!!!!

Cheers Rob

Love my Forster. Bought in 92 and still going perfectly.


Sent from my iPhone using Tapatalk. So please forgive my sausage fingers!!!

Lee collet set is USD 35

Std seating dies difference, you tell me ? If you looking at the Wilson stainless with micrometer seater, that has some functional benefits, but is closer to USD 100. Plus won't you need some form of full length sizer, body die, bump die somewhere down the line ?

I'd rather spend money on brass, trim and turn it, and batch projectiles and cases by weight. Different strokes for different folks

Agree with you about the scales, get decent electronic one.

I use Wilson dies with my 6.5x47 great for loading at the range, K & N arbor Press

if you want to buy local, try Julian he's very helpful
Gunsmithing Tools, Reloading Equipment, Books & DVDs - Workshop Innovation

Originally Posted by kiwijames

Another Q. Anyone here running an arbour press?
My range is about 25 min drive away which makes load development a pain in the arse. I think I have been lucky with prior rifles as things ran pretty smoothly. Now with the 243 I want to try a few more things but just don't have the time to run back and forth to do exactly what I want. A simple arbor press and a Wilson seater would have me able to do it in the field real easy I was thinking.

While not wanting to debate which brand is better than another, I have a Sinclair arbor press and Wilson seater and you will have no problems undertaking the above with this set up. Good luck with your project.

Originally Posted by Nesika

While not wanting to debate which brand is better than another, I have a Sinclair arbor press and Wilson seater and you will have no problems undertaking the above with this set up. Good luck with your project.

Cheers. It did seam the logical way to go about things.

I am able to clamp my press to the towbar on my vehicle when at the range. The main issue is weighing the powder at the range. I only have balance beam scales and they are a bit of a pain to level in the vehicle, and not get any wind!