Printable View
Hi again
More questions. I’m based in Auckland and have to head into the shops to pick up some power and a press when allowed. Last time I reloaded the 284 15 years ago I just used the cheap LEE package which is $300 at reloaders and to be honest it worked fine and delivered good accuracy. This is the only press I have used so my sample size is one! Should I spend more? 100 rounds will last me a year as once my load is sorted I just use for hunting. Any advice??
With all due respect,
maybe if you have no particular interest apart from having your rifle shoot to it's potential,maybe just get some with the gear to do it for you?
If it worked for you in the past, it'll work for you now. 100 rounds a year isnt a lot.Quote:
Originally Posted by Forestry
Stick with LEE unless you get curious. In which case try something like an RCBS Rockchucker.
Hey mate,Quote:
Originally Posted by Forestry
There's a couple of presses on Trademe, including a Lee one that would be worth a look. Also worth keeping an eye out on the Buy, Sell part of this forum as there can be some good stuff come up on there.
I got my whole setup off this page and it's done me really well so far.
Iv always used lee over a range of cartridges works for me
Can you do mine I hate loading :XD:Quote:
Originally Posted by widerange
Lee press has been good for me.
Their scales a bit average.
Maybe?
I enjoy it,especially if I get to shoot some of the bullets I make.
That's the thing that I didn't bother with when I bought my LEE anniversary kit.Quote:
Originally Posted by nevereadyfreddy
I got some Hornady GS1500 scales for a more accurate read on what I was weighing.
I got the Lee anniversary kit also. It's loaded a bunch of ammo for me for 5 different rifles. Have managed to produce consistent MOA loads for each without too much fuss. Like others have done I've updated scales and a few case prep tools but otherwise can't really fault it.
If your only doing 100 rounds a year I think I'd struggle to justify an upgrade. I'm tempted to get another press just to increase efficiency with a dedicated sizing press and seating press.
If you really only do 100 rounds a year and it's in a quality rifle with a tight spec chamber ... you can't go wrong with a basic Lee Loader kit.Quote:
Originally Posted by Hunty1
Thanks again. I did have someone loading for me over the past years but they have got pretty old and are based in SI so moving stuff around is expensive and a hassle. Primers were not seated properly in last batch so I need to move on. I also need a hobby as evidenced by going stir crazy this lockdown and hence all my questions. Funny enough my experience with the LEE scale last time was bad so I ordered a small Hornady digital one yesterday along with a neck sizing due as suggested in previous post. Sounds like I buy the LEE when I go get powder. Thanks all
Lee all the way, works well no fuss
Hey @Forestry have you had a look at the book from Nathan Foster about reloading? He runs through all the different brands and the pros and cons in his opion.Quote:
Originally Posted by Forestry
With only 100 rounds a year and if you want to keep the price down, space is an issue and you really want to get into it then the Lee Breech lock hand press might be the way to go. Its still produce the same as good as a brench press. But wont take up the space. Also there seems to be a better after market sales value on these if you want to up grade further down the track. You can still buy the shell holders and dies same as normal.
But as Muzza says in #15 if none of the above options tickel your fancy then buy factor rounds. If you buy a few boxs and find out which ones shoot best. Save all he brass and you can sell on here. Someone will take it.
Last Option is have a look on here and see if someone is willing to reload (That You Trust) for you. Obviously theres a risk in this if they are loading above max. But then you have already been taking this risk already.
The lock down wont last forever so you need to decide if you will have the time after its lifted or will you then be stuck with a load of reloading stuff that you dont have time to use.
Hope this helps.
Cheers S
@Forestry I gather from your other post you are looking to reload 284win? Guess factory ammo is not an option?
Thanks for the tips and also offer from Mick
Factory ammo is no longer available and was pretty average on the accuracy front when I had some due to a massive jump to rifling
I do have a 30-06 that I will also reload for and I still remember my old load 58grs 2209 behind a 165SST.
I’m actually looking forward to doing some load development and trying some heavier bullets in the 284 (and maybe some 120 TTSX also at some stage)
If I lose interest I now know about the buy and sell here to move it on
Quote:
Originally Posted by muzza
How so i only used 50 rounds last year thats taking others hunting to probably.30 myself