If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed.
So I have sat down to do my first ever reloads and I have hit a bit of an impass.
I am trying to load .223 with barnes tsx 55gr. The load data says gap from rifling lands to bullet should be .050 or 1.27mm. When I put a bullet in a empty cartirige and seat it by putting it in the rifle and closing the bolt, I get an OAL of 60.02, more or less. Max OAL according to the die set is 57.4mm, this means that unless I am mistaken if I seat to maximum OAL I will have a 2.62mm/.103" jump to the rifling.
Rifle is a Zastava .223
I am probably doing something wrong, help please!
Also, one cartrige the primer didnt go quite flush, any suggestions on if I should rework or just dispose of that one.
Cheers
Guy
Save yourself some grief. Seat to the cannelure and stoke with 25gr BM2. Repeatable ,reliable, kills like hell. Job done.
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!
Bookmarks