Originally Posted by
Micky Duck
ok so the simple lee jobbie
#1 stick case head in the holder which is in your cordless drill and tighten
#2 poke the pokey thing down throat of case till cutty thing enguages case mouth
#3 push trigger on drill
#4 remove pokey cutty thing from now correct length case
#5 get your case mouth deburry thing in other hand
#6 poke said deburry thing onto case mouth
#7 press trigger on drill for maybe 2 seconds
#8 reverse deburry thing and engauge other end (inner Vs outer)
#9 press trigger on drill another maybe 2 seconds
#10 remove case from holder in drill
but if case is dirty/tarnished.....
#9.5 put scotchbrite cloth against case and give another whirl......
toomecki Bro toomecki
