Cast Lead Thread ?

[T.FOYE]

Check Amazon eh. I got a lyman electronic one with a probe and it does the job well. Really cheap too considering what it does

[T.FOYE]

Am very much looking fwd to this arriving soon. It's the only hollowpoint mould MP has in stock atm for the .458 fans. They do have a more sleek model but it's on backorder (and makes a lighter projectile).

[akaroa1]

[JD300]

Am very much looking fwd to this arriving soon. It's the only hollowpoint mould MP has in stock atm for the .458 fans. They do have a more sleek model but it's on backorder (and makes a lighter projectile).

Nice that's what I would like to run for my HV rounds what that set you back? how long is it expected to take?

[Jhon]

Check Amazon eh. I got a lyman electronic one with a probe and it does the job well. Really cheap too considering what it does

Would a probe style analogue thermometer from my old Weber BBQ do the job?

[No.3]

Would a probe style analogue thermometer from my old Weber BBQ do the job?

No, and likely not accurate enough. Ideally a socket and thermocouple in through the side of the pan into the molten puddle would give you the most reliable reading - I've used a laser in the past and found them quite rubbish especially on gas rings as the melt source. The laser tends to get confused and end up trying to read the heat coming off everything as it's just too radiant with too much convecting heat to get a decent IR ping of the surface of the metal.

[T.FOYE]

Only problem... raining outside so I can't fire up the melter

[JD300]

Attachment 205445
Only problem... raining outside so I can't fire up the melter

That is one hell of a pretty mold nice one man looks like it will cast a mean as projectile.

[Machurite]

I make my own moulds for 45/70, and im using lead at around 10 to 14BHN depending on the mould also use the pencil check method it works fine, shooting out to 960 yards with open sights