Thread: clarification 7mmRm + ar2217 + hornady eldx 150g

Originally Posted by ChrisW

You can still use the pulled projectiles. If you are using a collet type puller just don't clamp down on them too hard.

Maybe post a picture of the .300 projectiles, Id think they would be ok and the only detriment might be slightly reduced accuracy, but without seeing the damage its hard to really say.
I would generally use such damaged projectiles for fouling shots, sighters, even the pressure test as accuracy is of no concern; and use only non-damaged ones for the serious accuracy/group testing.

perfect, what a massive help. I have a Lyman magnum bullet puller on its way.
I have made myself a little bit of a plan if you wouldnt mind looking over it quickly? Also Are these powders ok for both of these ? Or would you or somone else recommend a different powder? From what i can tell 2217 is good for 7mmRm, and ok for the 300.

7mmRm
1x 150g hornady eldx + 64g ( min book amount )
1x 150g hornady eldx + 64.5g
1x 150g hornady eldx +65g
1x 150g hornady eldx +65.5g
1x 150g hornady eldx +66g
1x 150g hornady eldx +66.5g
1x 150g hornady eldx +67g
1x 150g hornady eldx +67.5g
1x 150g hornady eldx +68g
1x 150g hornady eldx +68.5g
1x 150g hornady eldx +69g
1x 150g hornady eldx +69.5g
1x 150g hornady eldx +70g
1x 150g hornady eldx +70.5g
1x 150g hornady eldx +71g
1x 150g hornady eldx +71.5g
1x 150g hornady eldx +72g ( max book amount )
1x 150g hornady eldx +72.5
1x 150g hornady eldx +73g


300WM
1x 178g hornady eldx + 76g ( min book amount )
1x 178g hornady eldx + 76.5g
1x 178g hornady eldx + 77g
1x 178g hornady eldx + 77.5g
1x 178g hornady eldx + 78g
1x 178g hornady eldx + 78.5g
1x 178g hornady eldx + 79g
1x 178g hornady eldx + 79.5g
1x 178g hornady eldx + 80g
1x 178g hornady eldx + 80.5g
1x 178g hornady eldx + 81g
1x 178g hornady eldx + 81.5g
1x 178g hornady eldx + 82g
1x 178g hornady eldx + 82.5g
1x 178g hornady eldx + 83g ( max book amount )
1x 178g hornady eldx + 83.5g
1x 178g hornady eldx + 84g


And fire each round, Over the Chrono , record the speed aswell as look for pressure signs. Then once pressure signs are apparent, Drop back to the previous load.

Next step : Once I have figured out the correct pressure range for my setup eg.70g for the 150g 7mmRm, then load 5 of each of 67g, 67.5g, 68gm 68.5g, 69g, 69.5g, 70g.

Next Step : Once fired, Choose the recipe with the best grouping , eg. 68.5g , and load up 3x rounds of 68.1g, 68.3g, 68.4g, 68.5g, 68.7g, 68.8g ?

If im still not getting any good accuracy then I need to switch projectiles or powder ?