Thread: electronic powder despinsers

Originally Posted by steven

Gunsmithing &Reloading Tools - RCBS Chargemaster Combo, Scales

however they are $740NZ here, so even if you pay GST its $560NZ, a $180NZ saving is still a nice wedge, damn the exchange rate sucks.

The lyman gen 6 would be $220US so no GST and $50 landing charge so $120NZ cheaper.

I think your CM calc may have omitted shipping and the Bio fee so maybe a saving of only 70 bucks.
Unless it came in gst and bio free but those happy events are now few and far between.
Fortunately got mine back in the .85 xchange rate although I still go burned with the current rate when I had to replace the 1500 scale unit recently.

Originally Posted by zimmer

I think your CM calc may have omitted shipping and the Bio fee so maybe a saving of only 70 bucks.

Add in a local power supply.

I picked mine up from Workshop Innovation.

I would also strongly, strongly suggest looking at a line conditioner for your power. Especially if you have anything else on the same circuit, or fluro tubes in the garage/reloading space.

Mine is setup and works phenomenally - I check a couple of charges on the GemPro next to it - but they generally are both bang on. Just want another one now so I can load back and forth between them.

Originally Posted by The Bloke

Add in a local power supply.

I picked mine up from Workshop Innovation.

I would also strongly, strongly suggest looking at a line conditioner for your power. Especially if you have anything else on the same circuit, or fluro tubes in the garage/reloading space.

Mine is setup and works phenomenally - I check a couple of charges on the GemPro next to it - but they generally are both bang on. Just want another one now so I can load back and forth between them.

Can you give me more details on a line conditioner? Where from expected cost maybe?