Thread: found another 44/40 mold

hi have found another 44/40 mold it has no crimp groove and its a gas check mold

That would be a good one for powder coating

Originally Posted by bluecod357

hi have found another 44/40 mold it has no crimp groove and its a gas check mold
Attachment 290078
Attachment 290079
Attachment 290080

Nice!

My opinion
The one you posted a few days ago is the better bullet for bp
Ether bullet would work well for smokeless and or as akaroa says powder coat

At the end of the day its a 44/40 its not a long range precision rifle so as long as the chosen bullet functions well in your rifle or pistol im sure any bullet will be fit for perpose

If your shooting bp lube is the biggest factor. ..
You need to keep that fouling soft to keep your accuracy after more than 4 or 5 shots without cleaning

@rambo-6mmrem

im just shooting it with 4.2 gn as50 not a cat sneeze but not scorching either in both pistol and a rossi lever gun cheers mate

Ether or then
Both would work equally as well
I bet you could fill your mag half and half and not notice
Id powder coat rater than a wax based lube for smokeless