If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed.
Doubt that will be necessary, pretty sure annealing and lube will be more than enough.
The guy in the vid was short by 8 thou. You will need to use pretty thick lube methinks. But I'm sure no manufacturer would be dopey enough to release a press which won't do the most fundermental of reloading tasks. Good luck, watching with interest.
The guy in the vid was short by 8 thou. You will need to use pretty thick lube methinks. But I'm sure no manufacturer would be dopey enough to release a press which won't do the most fundermental of reloading tasks. Good luck, watching with interest.
I see your point, I thought you were talking about the issue of bending the shell holder plate caused by a stuck case (caused by insufficient lube possibly).
I'll go size a case now and update on if it's an issue as far as being able to bump the shoulder back enough.
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!
Bookmarks