Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator DPT


User Tag List

Results 1 to 4 of 4
Like Tree3Likes
  • 1 Post By Steelisreal
  • 2 Post By Tahr

Thread: Hammer Projectiles 6.5

Threaded View

  1. #2
    Member
    Join Date
    Jan 2018
    Location
    Christchurch
    Posts
    729
    What twist rate is your barrel? Are you shooting a 6.5*55AI as per your signature?

    If you were shooting only inside 300 yards any will work. The general advice of going lighter than 'standard' and driving them fast seems to be applicable to Hammer bullets as well. But going out to 500 means you need to pay more attention to the ballistic coefficient of the projectiles. That usually meant the Hammer Hunter, but now there's a new model in the range, the Hammer Hunter Tipped. There's been a useful increase in BC and anecdotally on the Hammer forums the tip seems to be a positive influence on expansion at all velocities. They do a 125 grain HHT that's probably the smart choice for shots up to 500 yards. You'll have plenty of capacity to get them moving fast out of an Improved Swede.
    HUNTY likes this.

 

 

Similar Threads

  1. 284 Hammer projectiles in my 7mm-08
    By LJPRMC in forum Reloading and Ballistics
    Replies: 23
    Last Post: 14-11-2022, 07:29 AM
  2. Hammer Hunter Projectiles
    By Tahr in forum Reloading and Ballistics
    Replies: 51
    Last Post: 22-05-2021, 07:55 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!