Thread: Help with Tumbling

Originally Posted by mikee

Dillon Case Polish is your friend

Some of that, and I add a couple of cap fulls of turps every once and a while seems to help the cleaning, and also seems to stop corrosion/finger prints, etc. Not meaning get the walnut wet, just a little, and run it for 5-10 mins before adding brass, just to mix it through.

I get a bit of this, tumble overnight and box on regardless!

Originally Posted by Beaker

Some of that, and I add a couple of cap fulls of turps every once and a while seems to help the cleaning, and also seems to stop corrosion/finger prints, etc. Not meaning get the walnut wet, just a little, and run it for 5-10 mins before adding brass, just to mix it through.

Oh and I forgot, if your doing pistol/straight'ish walled cases, after the fresh turps in, they go through the press like a hot knife through butter. Sort of lubes them a bit. (9mm, Dillon 650 and carbide dies - theory don't need lube, but you notice the difference)