Thread: Hornady 6.5 eld-m 147gr

Sweet i ended up at 2820 odd with 46 ggees same oal as you. Extra 2" of pipe iirc
300 no dial validation group

Originally Posted by Gibo

Sweet i ended up at 2820 odd with 46 ggees same oal as you. Extra 2" of pipe iirc
300 no dial validation group
Attachment 69962

What do you mean by that?

I've stuck to the 140Amax and still have a hundred or so, but its good to hear there are still a couple of thousand available out there.

Originally Posted by Tahr

What do you mean by that?

I've stuck to the 140Amax and still have a hundred or so, but its good to hear there are still a couple of thousand available out there.

Mean by what bit mate?
46 grains of powder bit?

Originally Posted by Gibo

Mean by what bit mate?
46 grains of powder bit?

Sorry - the 300 yards non clicking thing test.

Originally Posted by Tahr

Sorry - the 300 yards non clicking thing test.

Oh, just checking true drop at a measured range once zero is set and measure in inches then play with the speed till i get the same drop in the app, i find its the next refinement after the chrony. These days i dont even bother with the chrony to be honest.

Originally Posted by Gibo

Sweet i ended up at 2820 odd with 46 ggees same oal as you. Extra 2" of pipe iirc
300 no dial validation group
Attachment 69962

What OAL length is that?
Have you loaded to a mag length or a distance off lands?