Hornady 7mm wsm brass

Anybody had any experience using the hornady 7mm wsm brass?

Mixed reviews on Bertram, mostly not positive. Seems i dont have much in the way of options

Such a lack of backing from brass makers. I dont really want to go through the small reforming process of necking down 300wsm to 7mm wsm.

Quote:

---

Originally Posted by keengunNic

Such a lack of backing from brass makers. I dont really want to go through the small reforming process of necking down 300wsm to 7mm wsm.

---

I'll say. And what options are out there are pretty spendy. I decided it was better to shoot a few boxes of Federal Powershok and then start reloading with the once-fired cases. Only problem is, at the rate I'm shooting them it's gonna be a couple of years before I'm ready :XD:

What about Winchester? I turned my nose up the first time with 300 wsm brass because all the necks were banged up out of the bag . Iv since got 100 .308 ran it threw the sizer and it's actually being bloody good

Quote:

---

Originally Posted by Kelton

What about Winchester? I turned my nose up the first time with 300 wsm brass because all the necks were banged up out of the bag . Iv since got 100 .308 ran it threw the sizer and it's actually being bloody good

---

Ended up going for the hornady stuff, if it holds up well thats good, if not, reduced loads till i can form some from norma 300wsm