Printable View
I’m just starting out load development with my 300wsm, I have superperformance and 168 classic hunters. Does anyone know a safe starting load and max? I don’t have the hornady reloading book. I will be cautious also as have find with 180nbts and rl17/2209 I hit pressure pretty early.
Any help appreciated.
iv got 2 Hodgdon manuals but neither are very helpful only having 150 and 180gn
Lots on line
Hodgdon
Alliant
Nosler etc etc etc
Attachment 165775
Z
I load 168 a max and 168 barnes with Hodgdon superprofrmance but I'm away I'll check my book when I get home if you like
Sent from my CPH1903 using Tapatalk
Any chance you could see what it has for the 180s? At least then I know a safe start loadQuote:
Originally Posted by Kelton
Sorry just checked and it doesn't list the superperformance for the 180 just 150 and 155s
74 for for 150s
It appears 72 is max for 165/168 mate abit of info on long range only
It appears that way, I see some of those guys having success around the 71 grain markQuote:
Originally Posted by Kelton
I brought the hornady reloading app for my iphone, for 165/168 bullets its give 60gr starting and 71.1gr max for superformance.
Not sure for the 168 gr bullet but in the nephews Rem 700 with 24 inch barrel, 68 grs of SF gave just over 3000 fps with the 178 gr ELDX.
Using a lighter bullet you should be able to go a little higher.
Right, so superperformance works with 168 classic hunters doing 2900 at about an moa (could probably tighten them up a bit). However I bought a box of 200grain eldx precision hunter and was quite shocked. They were doing 2700 straight off the bat, I got a couple of ejector stamps but no flat Primers out of 15 shots. They were also more accurate. Below is a 4 shot group. Now to decide to stick with factory ammo or persist with the Berger’s
Attachment 166025
If you measure the OAL of the 200gn Precision hunters that gives a good start for seating depth. I reload mine with 200Gn Eld-x but use a different powder 4000-MR, not popular so I found it easy to get.
This is a target I shot with them each shot was 1 grain higher than the previous, ( From 61-65 grains powder ) Ended up using 64gns as in the middle of the loads tested.
https://i.imgur.com/FdTvT0J.jpg
Precision Hunter ammo was awesome but ...........................$104 per box of 20 was hard to swallow
In my nephews 300 WSM the load he settled on in the end was the 200 gr ELDX with a load of 69 grs RL 26 , this load has a COAL of 73.5 mm , 24 inch barrel Rem 700 average velocity was 2957 fps and we verified at 400 yards with 17 inches drop. Safe in his rifle work up to make sure it's good to go in your rifle.Quote:
Originally Posted by cameronjackwhite
Quote:
Originally Posted by Mooseman
Should have mentioned, mine is 20” so I would expect 150-200fps less than standard. I also seem
To strike pressure early. The factory hornady was stamping but all in all pretty happy with 2700. A lot of energy way out
Yeh 2700 fps with a 200 gr bullet is going to make critters stand to attention, I like those 200 gr ELDX bullets in my 300 Win Mag to at 2900 fps. On Saturday I tried the new VX5 on it out to 700 yards and shot about a 6-7 inch group pretty much on the money so next week on our tahr hunt I feel reasonably confident if a long shot comes up.
Did i see this for sale now?
Hybrid100V pushing 180 Berger EH (BC G1 0.576 ) at 3030fps out of 24in bbl.
